User manual KONICA MINOLTA FD-503

[. . . ] bizhub PRO 1050/1050e/1050P/1050eP Additional Information The following options are newly provided to bizhub PRO 1050/1050e/1050P/1050eP. Large Capacity Stacker LS-505 Folding Unit FD-503 Saddle Stitcher SD-506 Perfect Binder PB-502 Please refer to this guide for the operation and safety information on the above options, and keep it inside the user's guide of copier so that it is readily available for reference. Contents 1050/1050e Installation Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1050P/1050eP Installation Space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Machine Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Standard/Optional Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Large Capacity Stacker LS-505 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Folding Unit FD-503. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Saddle Stitcher SD-506 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Touching Function Off will deselect the Fold&Staple (and Trimming) mode, however, the specified setting will be kept in memory. 4. Touch OK on the Output Application Screen. The output icon of the selected output mode will be displayed on the Copy Screen. Booklet function in the Application setting has been selected automatically. 41 Using Saddle Stitcher SD-506 (continued) 5. Withdraw the Saddle stitcher tray. Open the tray stand when fully withdrawn. The folded and stapled (and trimmed) sets will be delivered into the Saddle stitcher tray. If the tray is not fully withdrawn, the machine will detect that the tray is filled up, even with less number of finished sets than that specified in specifications. Never return the Saddle stitcher tray to its original position with the tray stand opened. 42 Using Saddle Stitcher SD-506 (continued) Folding Copied Set (1050/1050e only) Machine with the Saddle Stitcher SD-506 installed provides Multi Center mode to double-fold up to 5 sheets of copied set, or Multi Letter mode to fold it inside in three. Using Multi Letter, the print side can be specified on the screen. Specifications for Multi Center / Multi Letter Using Multi Half Fold mode, the finished sets will be delivered to the saddle stitcher tray. Using Multi Tri-Fold mode, the finished sets will be delivered to the multi-folding mode tray. Multi Center + Non Trimming Multi Center + Trimminng Multi Letter + Inside Print Multi Letter + Outside Print 1. Touch Output Application on the Copy Screen. The Output Application Screen appears. 43 Using Saddle Stitcher SD-506 (continued) 2. Touch Multi Center or Multi Letter to select it. If Multi Center is selected, the Multi Center Screen will be displayed to specify whether or not to trim the edge of the folded sheets. Touch Trimming or Non Trimming to select it. If Multi Letter is selected, the Multi Letter Screen will be displayed to specify the print side. Touch Outside Print or Inside Print to select it. The Output Application Screen will be restored. If you touch Cancel, the previous setting will be restored. Touching Function Off will deselect the mode, however, the specified setting will be kept in memory. 3. Touch OK on the Output Application Screen. The output icon of the selected output mode will be displayed on the Copy Screen. With Multi Center selected, Booklet function in the Application setting has been selected automatically. 44 Using Saddle Stitcher SD-506 (continued) 4. If Multi Center is selected, withdraw the Saddle stitcher tray. Open the tray stand when fully withdrawn. · The double-folded sets will be delivered into the Saddle stitcher tray. If the tray is not fully withdrawn, the machine will detect that the tray is filled up, even with less number of finished sets than that specified in specifications. · The triple-folded sets will be delivered into the Multi-folding tray. Never return the Saddle stitcher tray to its original position with the tray stand opened. 45 Using Perfect Binder PB-502 The machine with the optional Perfect Binder PB-502 installed automatically attaches a copied set with a cover sheet to make a perfect-bound book, applying a dab of glue in the center line of the cover sheet to fix the spine. In the Perfect Binding mode, both simplex and duplex copying are available for the body set, and also the cover sheet can be blank, simplex-printed or duplex-printed, and even trimmed to match with the thickness of the body set to cover. The binding direction can be selected from left and right. · Use only the paste GC-501 for this binder. · In order to prevent degradation of paste owing to heating, ensure that the machine is turned off when it is not in use. It is recommended that you adjust the time settings for the low power mode and shut-off mode to the main body to suite the usage of the Perfect Binder, since they apply to the binder as well. Body set Back side of Front cover Cover lead edge adjustment Left binding (When right binding, the cover is upside down. ) Back side of Back cover Head Cover Cover trimming Front side of Front cover Spine width Foot Front side of Back cover 46 Using Perfect Binder PB-502 (continued) Even number originals Body set: simplex, Cover print: Off Blank Blank Blank Body set: duplex, Cover print: Off Blank Blank Blank Blank Body set: duplex, Cover print: On, Cover print side: simplex Blank Blank Body set: duplex, Cover print: On, Cover print side: duplex Blank Body set Cover 47 Using Perfect Binder PB-502 (continued) Odd number originals Body set: simplex, Cover print: Off Blank Blank Blank Body set: duplex, Cover print: Off Blank Blank Blank Blank Body set: duplex, Cover print: On, Cover print side: simplex Blank Blank Blank 2 4 6 1 Blank Body set: duplex, Cover print: On, Cover print side: duplex Blank Blank 1 2 Body set Cover 48 Using Perfect Binder PB-502 (continued) Specifications for Using Perfect Binder PB-502 Warm-up/Low Power/Shut-Off The perfect binder requires longer warm-up time than that required for the main body, while the Low Power/Shut-Off mode activates at the same time on main body and perfect binder. We recommend you to specify the time to activate the Low Power/Shut-Off mode in view of the frequency to use the perfect binder. [. . . ] Cover sizes available for perfect binding differ from the above mentioned. 49 for details. 70 Add Staples Inserting a New Staple Cartridge into Saddle Stitcher SD-506 When the staple cartridge of the Saddle Stitcher SD-506 is empty, the Cartridge indicator lights in red in the option status area of the Machine Status Screen. If printing job is in progress, a message will be displayed on the Copy Screen. Follow the procedure below to replace the staple cartridge. 1. Open the left side door of the Saddle Stitcher. 71 Add Staples (continued) 2. Remove the empty cartridge. Hold both left and right sides of the staple cartridge, then draw it forward. The machine is mounted with two staple cartridges. [. . . ]