User manual KONICA MINOLTA KN-304

[. . . ] USER'S GUIDE KN-304 Please read this guide before using the board and keep readily available for reference. Thank you very much for your purchase of the KN-304. This Guide deals with making prints, correct handling of the machine, and precautions for safety. In order to maintain a satisfactory printing performance, please keep this Guide readily available for reference. sPreface The KN-304 Network Board is a network interface board for the Konica IP-011 Printer Controller. When the KN-304 Network Board is installed in the Konica IP-011 Printer Controller, the Konica 7020 series can be used as a network printer. [. . . ] A prompt asks you saying [Print Test Page?] Select [Yes] to print a test page and [No] otherwise, and then click the [Finish] button. A test page will be printed out if so designated. s Printer Driver Setup from Client When the printer connected for Microsoft TCP/IP Print Service is set up as a shared printer, a Windows computer set up as a Microsoft network client can be connected to the printer. To use a shared printer, each client should install the printer driver (Konica IP-011 Nozomi) and, for this purpose, use [setup. exe] held in the [95 nozomi] or [Ntnozomi] folder. The setup program allows to install not only the printer driver but the Konica IP-011 Nozomi Printer Tools and Readme. txt. Use the Printer Tools from a computer connected in parallel with the printer. For more detail of the printer driver, refer to the instruction manual of the Konica IP-011 Printer Controller. Double-click [Setup. exe] in the [95nozomi] folder if the client's OS is Windows 95/98, or in the [Ntnozomi] folder if the OS is Windows NT, to start the installer. When the startup screen of the installer has appeared, click the [Next] button. Click [Yes] if you agree. 4-4 KN-304 Network Board Chapter 4 Printing by lpd/lpr (Windows NT) Select [Network] as the form of printer connection and click the [Next] button. Designate the Network Board in the form of "\\computer name\ shared printer name". If the [Konica IP-011 Nozomi Printer Tools] is included in the components to be installed, a prompt will ask you saying "Start up Status Monitor automatically?" Click [Yes] to select automatic startup and No otherwise. On completion of installation, a prompt asks you whether to restart Windows immediately or not. Click the [Finish] button finally. To enable the Konica IP-011 Nozomi Printer Tool, you have to restart the system. KN-304 Network Board 4-5 Chapter 5 NetWare Setup s Setup for NetWare 2. x/3. x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 s Setup for NetWare 4. x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 q Setup information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 q NDS setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 KN-304 Network Board 5-1 Chapter 5 NetWare Setup To print with the Konica 7020 series fitted with the KN-304 Network Board by using Novell NetWare, the setup procedures depend on the NetWare version and the method of resource management. s Setup for NetWare 2. x/3. x Before setting up NetWare, you have to define the print server name, etc. , from the 7020 series machine's LCD panel or MAP (Web utility). Set up the primary file server as necessary. On completion of setup, turn off printer's main power and turn it on again. The printer will print out a network setup list indicating the file servers fitted with KN-304 and the queues that the file servers will service. MEMO The primary file sever must be defined if the network is of a large scale and connects many sites having more than one file server. PCONSOLE should be used to set up the primary file sever. 5-2 KN-304 Network Board Chapter 5 NetWare Setup sSetup for NetWare 4. x Novell NetWare 4. x can operate in two modes, NetWare Directory Service (NDS) and Bindery Emulation Service (Bindery Emulation). It is also possible to set up the print server so that it operates only in Bindery Emulation Service mode or in NDS mode. The print server set up for NDS mode will also service the file server of an old version operating in Bindery mode. If NDS is not set up properly for the print server card and Bindery Service mode is not operating, the print server card cannot find the file server and Novell NetWare protocol will be indicated as inactive in the network setup list. q Setup information NDS NetWare Directory Service (NDS) offers a different, more advanced approach to network management than previous NetWare versions. [. . . ] 6-5 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5, 6-6, Appendices-4 N NDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8, 6-8 NDS setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8, 6-8 NetWare 2. x/3. x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]