User manual KONICA MINOLTA KN-304-QSG EJ

[. . . ] IP-P2P This realizes peer-to-peer printing by TCP/IP from Windows 95 or 98. 2 KN-304 Quick Configuration Guide q Purpose of this Guide This Quick Configuration Guide provides a concise description of the required setup procedures for using the KN-304. Please refer to the "Konica KN-304 Network Board User Guide" contained on the CD-ROM for more detailed information. Separate user's manuals are provided for the printer and printer controller ("Konica 7020 Instruction Manual" and "Konica IP-011 Printer Controller User Guide"). Please refer to the respective manuals for detailed operating procedures of Microsoft Windows 95, 98 or NT, Novell NetWare and other applications. [. . . ] When the required parameters have been entered and the [Add] button is clicked, the printer that has been set is added to the list of [Available Printers]. A printer can be deleted by selecting a printer from the list and clicking the [Delete] button. [Name]: Enter the printer name displayed when the printing destination port is selected in setup of the printer driver. [Port]: A number that is one larger than the IP port is displayed for the port number. [Description]: A character string is entered for the purpose of explanation. This character string is displayed after the port number when selecting the printing destination port in setup of the printer driver. English q Printer Driver Installation After IP peer-to-peer setup is completed, install the "Konica IP-011 nozomi" printer driver. Insert the CD-ROM containing the printer driver into the CD-ROM drive and double-click on [Setup. Proceed with installation by following the instructions displayed on the screen. In addition, select the printer name set with the IP peer-to-peer program for the printer port. In addition, the "Konica IP-011 Printer Tool" cannot be used. Once installation is completed, although the program will then ask if Windows is to be reset immediately, since it is not particularly necessary to reset Windows, select "No" and then click on the [Finish] button. KN-304 Quick Configuration Guide 5 s When Using in an Environment Consisting of Windows NT and Windows 95/98 Printing can be performed using TCP/IP printing service (lpr) from a computer compatible with Windows NT. Install "Microsoft TCP/IP Printing" if it is not already installed. Add the printer port and install "Printer Driver". q TCP/IP Setup of KN-304 (Printer) Refer to "q TCP/IP Setup of KN-304 (Printer)" on page 4. q Installation of Microsoft TCP/IP Printing Service When [Network] is selected from the [Control Panel] of a computer compatible with Windows NT, the [Network] dialogue box is displayed. Click on the [Services] tab and confirm that [Microsoft TCP/IP Printing Service] is present in the [Network Services] list. If [Microsoft TCP/IP Printing Service] is not on the list, add it to the list. Refer to the Windows NT help menu for information on the procedure for adding Microsoft TCP/IP printing. q Addition of Printer Port and Installation of Printer Driver Once installation of Microsoft TCP/IP Printing Service has been completed, perform addition of the printer port and installation of the "Konica IP-011 nozomi" printer driver. The procedures for adding the printer port and installing the printer driver are as described below. Select [LPR Port] from the [Available Printer Ports] of the [Printer Port] dialogue box, and then click on the [New Port] button. 6 KN-304 Quick Configuration Guide Enter the IP address assigned to the KN-304 in [Name or Address of Server providing lpd] of the [Add LPR-compatible Printer] dialogue box. Enter "Port 1" for the [Server Printer Name or Printer Cue Name] and then click on the [OK] button. When the [Next] button of the [Add Printer Wizard] is clicked, the program proceeds to installation of the printer driver. Insert the CD-ROM containing the printer driver into the CD-ROM drive and click on the [Have Disk] button. Designate the CD-ROM drive for the [Copy manufacturer's files from] and then click on the [Browse] button. [. . . ] It should be noted that as the designated value becomes larger, the amount of traffic encountered becomes correspondingly larger. English q Web Utility The procedure for using the web utility is as described below. Select [Start], [Program], [Map] and then [MAP] to start up the MAP program. When MAP is started, it searches for a KN-304 on the network according to the contents of the MAP settings. When a KN-304 is detected, the web browser designated as the standard browser is started up and a list of available KN-304 printers is displayed. [. . . ]