User manual KONICA MINOLTA MAGICOLOR 2400W

[. . . ] The printing system CUPS adopted to run on the Linux is published by ESP (Easy Software Products) under the GPL. All source codes that we write must be available to the general public. Trademarks KONICA MINOLTA, the KONICA MINOLTA logo, and PageScope are trademarks or registered trademarks of KONICA MINOLTA HOLDINGS, INC. magicolor is a trademark or registered trademark of KONICA MINOLTA PRINTING SOLUTIONS U. S. A. , INC. All other trademarks and registered trademarks are the property of their respective owners. Notice KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. [. . . ] It provides a framework that allows networking applications to discover the existence, location, and configuration of networked services. Instead, they need to know only the description of the service they are interested in. Based on this description, SLP is able to return the URL of the desired service. Unicast, Multicast, and Broadcast SLP is a unicast and a multicast protocol. This means that messages can be sent to one agent at a time (unicast) or to all agents (that are listening) at the same time (multicast). In theory, broadcast messages are "heard" by every node on the network. Multicast differs from broadcast because multicast messages are only "heard" by the nodes on the network that have "joined the multicast group. " For obvious reasons network routers filter almost all broadcast traffic. This means that broadcasts that are generated on one subnet will not be "routed" or forwarded to any of the other subnets connected to the router (from the router's perspective, a subnet is all machines connected to one of its ports). Network Printing 111 Multicasts, on the other hand, are forwarded by routers. Multicast traffic from a given group is forwarded by routers to all subnets that have at least one machine that is interested in receiving the multicast for that group. SNMP SNMP (Simple Network Management Protocol) is actually a set of protocols for managing complex networks. SNMP-compliant devices, called agents, store data about themselves in Management Information Bases (MIBs) and return this data to the SNMP requesters. Port 9100 When printing through a network, TCP/IP port number 9100 can be used to send raw data. SMB SMB (Server Message Block) is a protocol for sharing resources on the network, such as files and printers, in a Windows environment. If the Samba server software is used on Linux or UNIX, services using SMB can be shared. SMTP SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail. If nothing is entered in the IP Address text box, the text entered in the Port Name text box is added to the IP Address text box. Click Advanced to display the Configure Crown Port+ dialog box, and then specify the advanced settings for the Crown port. For Windows NT 4. 0, click OK. 8 9 10 For Windows Me and 98 SE: 1 2 3 4 5 Click Start, point to Settings, and then click Printer. Select Other, and then select Crown Port+ from the Click the type of port you want to add list. Adding a Crown Port After Installing Crown Print Monitor+ 119 6 Click OK. The Add Crown Port+ dialog box appears. 7 In the IP Address text box, type the IP address for the printer. For this address, type in a unique host name or the dot notation identifier (IP address) for the printer. 8 The printer search function is not supported with this printer. The logical name of the port is the description identifier for the port. If nothing is entered in the IP Address text box, the text entered in the Port Name text box is added to the IP Address text box. Click Advanced to display the Configure Crown Port+ dialog box, and then specify the advanced settings for the Crown port. In the Properties dialog box for the printer, click OK. 9 10 120 Adding a Crown Port After Installing Crown Print Monitor+ Configure Crown Port+ In the Configure Crown Port+ dialog box, specify the advanced settings for the Crown port. Parameter Status update interval Default Setting Description 5 seconds Specify the interval that Crown Print Monitor+ updates the print manager with the status of the printer connected to this port. Specify the length of time to wait for an answer from the printer until Crown Print Monitor+ notifies the print manager that there is no response from the printer. Status request 10 seconds timeout Adding a Crown Port After Installing Crown Print Monitor+ 121 Parameter Send request timeout Default Setting Description 60 minutes Specify the length of time to wait for the print job to be sent until Crown Print Monitor+ returns the command to the Microsoft Print Spooler. [. . . ] If DNS Server is un-available, only the host name is used as Common Name. Range: Up to 63 characters Default: [Blank] Organization Unit Specifies the name of the post. Range: Up to 63 characters Default: [Blank] Locality Specifies the name of the municipality. Range: Up to 127 characters Default: [Blank] State/Province Specifies the name of the state or province. [. . . ]