User manual KONICA MINOLTA MAGICOLOR 7450

[. . . ] magicolor 7450 User's Guide ® 4039-9563-02A 1800806-001C Trademarks KONICA MINOLTA and the KONICA MINOLTA logo are trademarks or registered trademarks of KONICA MINOLTA HOLDINGS, INC. magicolor is a trademark or registered trademark of KONICA MINOLTA PRINTING SOLUTIONS U. S. A. , INC. PageScope is a trademark or registered trademark of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. All other trademarks and registered trademarks are the property of their respective owners. Copyright Notice Copyright © 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. , Marunouchi Center Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan. This document may not be copied, in whole or part, nor transferred to any other media or language, without written permission of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Notice KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. [. . . ] A USB cable is not included with the printer and must be purchased separately, if not supplied with your digital camera. 2 84 Camera Direct 3 4 From the digital camera, specify the image that you wish to print and the desired number of copies. Start printing from the digital camera. Camera Direct 85 Using Media Media Specifications What types and sizes of media can I load? Media Size Inch Millimeter D8K 10. 6 x 15. 4 270. 0 x 390. 0 11x14 11. 0 x 14. 0 279. 4 x 355. 6 4x6 4. 0 x 6. 0 101. 6 x 152. 4 A6 4. 1 x 5. 8 105. 0 x 148. 0 B6(JIS) 5. 0 x 7. 2 128. 0 x 182. 0 12x18 12. 0 x 18. 0 304. 8 x 457. 2 KAI 8 10. 2 x 14. 6 260. 0 x 370. 0 A3WIDE 12. 3 x 18. 0 311. 2 x 457. 2 A3 11. 7 x 16. 5 297. 0 x 420. 0 11x17 11. 7 x 17. 0 297. 4 x 431. 8 B4(JIS) 10. 1 x 14. 3 257. 0 x 364. 0 LETTER 11. 0 x 8. 5 279. 4 x 215. 9 SP FOLIO 8. 5 x 12. 7 215. 9 x 322. 3 GOVT LETTER 8. 0 x 10. 5 203. 2 x 266. 7 LEGAL 8. 5 x 14. 0 215. 9 x 355. 6 GOVT LEGAL 8. 5 x 13. 0 215. 9 x 330. 2 EXECUTIVE 7. 3 x 10. 5 184. 2 x 266. 7 STATEMENT 5. 5 x 8. 5 139. 7 x 215. 9 16K 10. 6 x 7. 7 270. 0 x 195. 0 UK QUARTO 8. 0 x 10. 0 203. 2 x 254. 0 FOOLSCAP 8. 0 x 13. 0 203. 2 x 330. 2 FOLIO 8. 3 x 13. 0 210. 0 x 330. 0 A4 11. 7 x 8. 3 297. 0 x 210. 0 A5 5. 8 x 8. 3 148. 0 x 210. 0 B5(JIS) 10. 1 x 7. 2 257. 0 x 182. 0 JPOST 3. 9 x 5. 8 100. 0 x 148. 0 JPOST-D 5. 8 x 7. 9 148. 0 x 200. 0 B5(ISO) 6. 9 x 9. 8 176. 0 x 250. 0 ENV #10 4. 1 x 9. 5 104. 7 x 241. 3 ENV MONARCH 3. 9 x 7. 5 98. 4 x 190. 5 ENV DL 4. 3 x 8. 7 110. 0 x 220. 0 ENV C5 6. 4 x 9. 0 162. 0 x 229. 0 ENV C6 4. 5 x 6. 4 114. 0 x 162. 0 ENV CHOU#3 4. 7 x 9. 3 120. 0 x 235. 0 ENV CHOU#4 3. 5 x 8. 1 90. 0 x 205. 0 ENV YOU#4 4. 1 x 9. 3 105. 0 x 235. 0 KAI 16 7. 3 x 10. 2 185. 0 x 260. 0 KAI 32 5. 1 x 7. 3 130. 0 x 185. 0 CUSTOM (Tray1) 3. 55 x 5. 50 to 12. 25 x 47. 24 90 x 140 to 311 x 1200 CUSTOM (Tray2) 3. 55 x 5. 50 to 12. 25 x 18. 00 90 x 140 to 311 x 457 Notes: * LEF=Long Edge Feed, SEF=Short Edge Feed Media Media Feed Direction* SEF SEF SEF SEF SEF SEF SEF SEF SEF SEF SEF LEF/SEF SEF SEF SEF SEF SEF SEF LEF SEF SEF SEF LEF/SEF SEF LEF/SEF SEF SEF SEF SEF SEF SEF SEF SEF SEF SEF SEF SEF SEF SEF SEF For custom sizes, use the printer driver to specify the settings within the ranges shown in the above table. 88 Media Specifications Media Types Before purchasing a large quantity of special media, do a trial print with the same media and check the print quality. Keep media on a flat, level surface in its original wrapper until it is time to load it. For a list of approved media, refer to printer. konicaminolta. com. Plain Paper (Recycled Paper) Tray 1 Up to 100 sheets, depending on the paper (Manual Feed weight. Orientation Tray 1 Face down (Manual Feed Tray) Tray 2 Face up Tray 3/4/5 Face up Driver Plain Paper (Recycled) Media Type Weight 64­90 g/m² (17­24 lb bond) Duplexing Supported sizes: A3Wide, A3, Ledger, 11x14, B4, A4, A4-R, A5, B5, B5-R, D8K, 12x18, Executive, Government Letter, Letter, Letter-R, Folio, Government Legal, Legal, Statement, UK Quarto, Foolscap, SP Folio, 16K, Kai 8, Kai 16 Use media that is Suitable for plain paper laser printers, such as standard or recycled office paper. These could cause poor print quality, media misfeeds, or damage to the printer. DO NOT use media that is Coated with a processed surface (such as carbon paper, digitally glosscoated media, and colored paper that has been treated) Carbon backed Media Types 89 Unapproved iron-on transfer media (such as heat-sensitive paper, heat-pressure paper, and heat-press transfer paper) Cold-water-transfer paper Pressure sensitive Designed specifically for inkjet printers (such as superfine paper, glossy paper, glossy film, and postcards) Already printed on by another printer, copier, or fax machine Dusty Wet (or damp) Keep media between 35% and 85% relative humidity. Layered Adhesive Folded, creased, curled, embossed, warped, or wrinkled Perforated, three-hole punched, or torn Too slick, too coarse, or too textured Different in texture (roughness) on the front and back Too thin or too thick Stuck together with static electricity Composed of foil or gilt; too luminous Heat sensitive or cannot withstand the fusing temperature (180°C [356°F]) Irregularly shaped (not rectangular or not cut at right angles) Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons Acidic Any other media that is not approved 90 Media Types Thick Stock Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all thick stock to ensure acceptable performance and to ensure that the image does not shift. Capacity Tray 1 Up to 10 thick stock sheets, depending on (Manual Feed their thickness. Tray) Tray 2 Up to 50(Thick 1, 2)/10(Thick 3) thick stock sheets, depending on their thickness. Tray 3/4/5 Not supported Tray 1 Face down (Manual Feed Tray) Tray 2 Face up Tray 3/4/5 -- Orientation Driver Thick 1 (91-150 g/m2) Media Type Thick 2 (151-210 g/m2) Thick 3 (211-256 g/m2) Weight 91­256 g/m² (17­43 lb bond) Duplexing See page 89 for supported sizes. Banner Paper Weight: 127-160g/m2 Width: 210-297mm Length: 458-1200mm Media Types 91 DO NOT use thick stock that is Mixed with any other media in Tray 1 (as this will cause printer misfeeding) Envelopes Print on the front (address) side only. Some parts of the envelope consist of three layers of paper--the front, back, and flap. Capacity Tray 1 Up to 10 envelopes, depending on their (Manual Feed thickness Tray) Tray 2 Up to 10 envelopes, depending on their thickness Tray 3/4/5 Not supported Orientation Tray 1 Face down (Manual Feed Tray) Tray 2 Face up Tray 3/4/5 -- Driver Envelope Media Type Weight 64­163 g/m² (17­43 lb bond) Duplexing Not supported Use envelopes that are Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Approved for laser printing Dry DO NOT use envelopes that have Sticky flaps Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for sealing Transparent windows 92 Media Types Too rough of a surface Material that will melt, vaporize, offset, discolor, or emit dangerous fumes Been presealed Media Types 93 Labels A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet: The face sheet must follow the plain paper specification. The face sheet surface must cover the entire carrier sheet, and no adhesive should come through on the surface. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Try printing your data on a sheet of plain paper first to check placement. Check your application documentation for more information on printing labels. Capacity Tray 1 Up to 10 label sheets, depending on their (Manual Feed thickness Tray) Tray 2 Up to 50 label sheets, depending on their thickness Tray 3/4/5 Not supported Orientation Tray 1 Face down (Manual Feed Tray) Tray 2 Face up Tray 3/4/5 -- Driver Label Media Type Weight 64­163 g/m² (17­90 lb) Duplexing Not supported Use label sheets that are Recommended for laser printers DO NOT use label sheets that Have labels that easily peel off or have parts of the label already removed Have backing sheets that have peeled away or have exposed adhesive Labels may stick to the fuser, causing them to peel off and media misfeeds to occur. 94 Media Types Are precut or perforated Do not use OK to use Shiny backed paper Full-page labels (uncut) Letterhead Try printing your data on a sheet of plain paper first to check placement. [. . . ] When transporting the printer, assign an adequate number of persons to the job and ensure that each person can take a good position of not being excessively loaded. (weight: 59 kg/129. 9 lb) Note Before placing the printer on the lower feeder unit, make sure that the lower-right cover of the printer has been removed. If the cover has not been removed, the printer or lower feeder unit may be damaged. 9 Using a screwdriver, install the two securing brackets at the rear of the printer. 10 Pull out the trays. 220 Lower Feeder Unit 11 Install the two securing brackets at the front of the printer. 12 Close the trays. Lower Feeder Unit 221 13 Remove the mounting tape on the relay harness of the lower feeder unit, and then remove the cover over the relay harness connection slot on the printer. If multiple lower feeder units have been installed, remove the cover over the relay harness connection slot for any lower feeder unit other than that on the bottom, and remove the mounting tape on the relay harness. [. . . ]