User manual KONICA MINOLTA MAGICOLOR MC2300W

[. . . ] Support Department Website: printer. konicaminolta. com Updating the MC2300W firmware and driver. Information Level: 4 (2 = Semi-confidentional, Konica Minolta, internal use only, 3 = Service Partners/Distributors/First Line usage only. 4 = General Information, may be send to end-users. ) Printer involved: Operating system: Magicolor 2300W all Konica Minolta Printing Solutions can not be held liable for damage as result of incorrect firmware updates. . [. . . ] Press `OK' on the message below: Page 2 of 7 Konica Minolta Printing Solutions Europe B. V. Support Department Website: printer. konicaminolta. com A status display will show the progress of the firmware update. Press `OK' on the message below: Now please close the firmware update utility. Cancel any "New hardware found" screens which may pop up on your PC. (In the Fwrite folder, doubleclick the Fwrite application icon, the firmware update application will start up with the screen below) To check the current firmware version, select `Get Version' in the screen below and press `Select'. Press `Yes' in the screen below: Page 3 of 7 Konica Minolta Printing Solutions Europe B. V. Support Department Website: printer. konicaminolta. com The firmware has been updated now, you can exit the update application. (in this example the firmware version is v3926) Page 4 of 7 Konica Minolta Printing Solutions Europe B. V. Support Department Website: printer. konicaminolta. com Updating the Magicolor 2300W printerdriver. When the Konica Minolta firmware has been installed on the printer, also the printerdriver needs to be updated from the Minolta-QMS version (v1. 1. 130. 0 or lower) to the Konica-Minolta version. (v1. 3. 1010. 0 or higher) Please follow the steps below to uninstall the currently installed driver and install the new Konica Minolta driver. (Start > Programs > Magicolor 2300W Utilities) Select the Magicolor 2300W and select "Uninstall". After printer uninstallation, you will be asked to restart your PC, select `Yes'. Reinstalling the Konica-Minolta MC2300W printerdriver: After rebooting the PC, the PC may detect the Magicolor 2300W, and the `New Hardware found' wizard may pop up. [. . . ] Support Department Website: printer. konicaminolta. com In the next screen, browse to the location of the driver files. In this folder, the requested MIMFN5_P file can be found. The requested files will be copied and driver installation is finished. Page 7 of 7 [. . . ]