User manual KONICA MINOLTA PI4700 UM 1.1.0

[. . . ] User Manual Pi4700e www. minoltaeurope. com The essentials of imaging Table of Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-5 Trademark Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-5 Limited Software Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-6 Minolta Network Card Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select Minolta Di470U-PS. ppd from the dialog box and click the Select button. 5 After the installation procedures have been completed, a small printer icon will appear to the left of the printer name. 6 Click the Setup. . . Make your Configuration choices and click the OK button. 7 A printer icon will appear on the desktop. If you have problems during the installations, please refer to the Advanced User Manual on the CD-ROM that is included with the controller. Pi4700e 2-13 2 Installation (Mac OS X) Installing the Printer Driver This section explains the installation procedure for the Macintosh printer driver for Mac OS X. NOTE è This printer driver is compatible with Mac OS X version 10. 2 or later. 1 Log in with administrator privileges. 2 Install the printer controller CD-ROM in the CD-ROM drive of your computer. 3 Copy Minolta Di470U-PS. ppd, Minolta Di470E-PS. ppd and MinoltaPPDPlugin. dmg to the desktop from the PPD folder on the CD-ROM. 4 Double-click MinoltaPPDPlugin. dmg to start. 5 Select the partition where the software will be installed, and then click the Continue button. 6 Click the Install button. The plugin for Di470PPD is installed. 7 Click the Close button. This completes the installation of the PPD plugin. beside Printer Model: 11 Select either Minolta Di470U-PS. ppd (for measurements in inches) or Minolta Di470E-PS. ppd (for metric measurements). Click the Choose button. 12 Select the appropriate printer model, and then click the Add button. The printer driver is installed. 2-14 Pi4700e Installing the Printer Driver 2 13 From the Printers menu, click Show Info. The Printer Info property dialog box appears. 14 Select Installable Options. 15 Enter the printer settings, and then click the Apply Changes button. If you have problems during the installation, please refer to the Advanced User Manual on the CD. Pi4700e 2-15 2 Installing the Printer Driver 2-16 Pi4700e Network Settings 3 3 3. 1 Network Settings Introduction Though this Network Card does not support NetBEUI protocol, it supports TCP/IP and IPX/SPX, which provides plenty of connection flexibility for the Windows computer. A Windows 95/98/Me network printer can be used by going through a Novell NetWare or Windows 2000/NT server. This Network Card, however, can be configured with its bundled peer-to-peer printing programs for peer-to-peer printing without a server. There are two ways you can print from Windows NT 4. 0 with TCP/IP: using the bundled IP Peer-to-Peer Printing Program, and using the Windows NT standard LPR printing function. There are two ways you can print from Windows 2000/XP with TCP/IP: using the Windows 2000/XP standard LPR printing function, and using the Windows 2000/XP standard IPP printing function. Pi4700e 3-1 3 3. 2 Network Settings Specifying the IP Address From the Printer's Touch Panel Setting procedure 1 Press the [Utility] key. 3 Touch [NetworkSet]. 4 Touch [IP Address]. 3-2 Pi4700e Network Settings 3 5 With the keypad in the operation panel, type in the IP address, and then touch [Enter]. 6 With the keypad in the operation panel, type in the subnet mask, and then touch [Enter]. 7 With the keypad in the operation panel, type in the default gateway, and then touch [Enter]. Pi4700e 3-3 3 again. Network Settings 8 In order to activate the address settings, turn the printer off, then on 3-4 Pi4700e Network Settings 3 3. 3 Peer-to-Peer Printing with TCP/IP Use the bundled IP Peer-to-Peer Printing Program for TCP/IP peer-topeer printing under Windows. Digital Copier Network Card TCP/IP Windows TCP/IP IP Peer to Peer Printing Program NOTE è Refer to the Advanced User Manual on the controller CD-ROM for details. Peer-to-Peer Printing Program is a Windows utility that lets you output directly to a printer from a computer on a network, without going through a server. l Network Card must have valid IP parameters assigned. NOTE è è Refer to the applicable Windows documentation for information about installing TCP/IP under Windows. Refer to the Advanced User Manual on the controller CD-ROM for Pi4700e 3-5 3 details. Network Settings 3. 4 Peer-to-Peer Printing with IPX/SPX Use the bundled IPX Peer-to-Peer Printing Program for IPX/SPX peer-topeer printing under Windows. With IPX Peer-to-Peer Printing Program, there is no need to run NetWare Client. Digital Copier Network Card IPX/SPX Windows 95/98/Me IPX/SPX-compatible Protocol IPX Peer to Peer Printing Program NOTE è Refer to the Advanced User Manual on the controller CD-ROM for details. Use this program for peer-to-peer printing under IPX/SPX. Just by installing this program, you can specify an IPX-based printer on the network as a printer port. Requirements l Computer must have IPX/SPX-compatible protocol installed. NOTE è Refer to the applicable Windows documentation for information Pi4700e 3-6 Network Settings about installing IPX/SPX under Windows. è 3 Refer to the Advanced User Manual on the controller CD-ROM for details. 3. 5 LPR Printing This section explains how to use the Windows NT 4. 0/2000/XP standard LPR printing function. Digital Copier Network Card TCP/IP Windows NT 4. 0/2000/XP TCP/IP Microsoft TCP/IP Printing NOTE è Refer to the Advanced User Manual on the controller CD-ROM for details. Requirements l Computer must have TCP/IP installed and enabled. l Network Card must have valid IP parameters assigned. Pi4700e 3-7 3 3. 6 IPP Printing Network Settings This section explains how to use the Windows 2000/XP standard IPP printing function. Digital Copier Network Card IPP Windows 2000/XP TCP/IP IPP Client NOTE è Refer to the Advanced User Manual on the controller CD-ROM for details. Requirements l Computer must have TCP/IP installed and enabled. l Network Card must have valid IP parameters assigned. 3-8 Pi4700e Network Settings 3 3. 7 Specifying network settings from PageScope Light Access PageScope Light for Pi4700e can be accessed directly from a Web browser. 1 Start the Web browser. 2 In the URL field, enter the IP address of the printer controller as shown below. [. . . ] Punch cannot be specified if Booklet or OHP interleaving is specified. No holes can be made if the type of paper is thick paper or OHP transparencies. Prints can at times be fed out without being punched if the direction of the paper loaded in the paper source is not appropriate. The paper direction and N-up do not match the setting made for Orientation. [. . . ]