User manual KYOSHO CAP 232-60 BREITLING

[. . . ] Oe Always keep this instruction manual ready at hand for quick · (No other radio may be used!@ Please use stronge control horns and pushlods intended for large sized models. [. . . ] B When cutting the film coverring, Do not cut toodeeply to avoid weakening The wood structurebeneath. B , Make certain parts are aligned accurately and play is reduced to a minimum. B , - , é Attach gearpant and wheel to leg using parts provided making certain wheel rotates freely. B ` "\ , Make certain parts are alignedaccurately and play is reduced to a minimum. B , Make certain parts are aligned accurately and play is reduced to a minimum. @ Adjust the travel of each control surface to the values in the diagrams. Oe This aircraft has been flight tested with snap-rolls and other aerobatic maneuvers. Oe Repeated flyng can cause stress cracks to appear in the wood and joints, please inspect after each flight. If any abnormalities are noted, repair immediately befor the next flight to avoid accsidents. If you notice irregular flight, investigate the cause and repair it befor the next flight. [. . . ] B To start the engine, set low throttle on the transmitter and hold the engine starter against the spinner. B OEð If the batteries of the radio system are flat, replace them with new ones. [. . . ]