User manual LA CROSSE TECHNOLOGY WS-6003U

[. . . ] 5) Mount the WS-6003U in a suitable location, where WWVB signals can be received. DETAILED SET-UP GUIDE I) BATTERY INSTALLATION Note: To avoid start-up problems make sure that the batteries do not spring free. A) ATOMIC CLOCK SET Battery Cover 3 Battery Compartment 1) Remove the battery cover, located on the backside of the unit and directly above the function buttons. Note: After the batteries have been installed all the LCD's (Liquid Crystal Display) will briefly light up. [. . . ] For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST "OFF". 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button once more until "On" flashes in the time LCD and "DST" flashes where the Weekday normally appears. 2) Press and release the "+" button to turn the DST off, as will be indicated by the display of "OFF" in the time LCD. 5 3) Press and release the "SET" button to confirm the DST setting, and to advance to select the language for the weekday. IV) LANGUAGE SELECTION FOR THE WEEKDAY 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 2 more times, until the default language "US" flashes in the time LCD. 2) Press and release the "+" button to toggle through and to select the desired language. There are 3 languages to select from: US F E English French Spanish 3) Press and release the "SET" button to confirm the language setting, and to advance to manually set the time. V) TIME SETTING Note: When the WWVB signal is found, that time will over-ride the manually set time. 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 3 more times, until the hour "12:00" flashes in the time LCD. Note: when setting the hour, "PM" will appear to the left of the hour display, if it is AM nothing will be displayed. 3) Press and release the "SET" button to confirm the hour setting, and to shift to select the minutes. 5) Press and release the "SET" button to confirm the time setting, and to advance to manually set the calendar. VI) CALENDAR SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date. 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 5 more times, until the default year "00" flashes in the date LCD. 3) Press and release the "SET" button to confirm the year, and to set the month. 6 4) The default month "1" will flash. Press and release the "+" button to select the appropriate month. 5) Press and release the "SET" button to confirm the month, and to set the date. Press and release the "+" button to select the appropriate date. 7) Press and release the "SET" button to confirm the date, and to set the weekday. 8) The default weekday "MON" (depends on selected language) will flash. Press and release the "+" button to select the appropriate weekday. 9) Press and release the "SET" button to confirm the calendar settings, and to advance to select either 12 or 24-hour time display. VII) 12/24-HOUR SETTING 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 9 more times, until the "12" hour time display flashes in the time LCD. [. . . ] Problem: 1) Move unit to an area with warmer or cooler surrounding Solution: temperature. Problem: 1) It may help reception to face the front of the Atomic Clock in Solution: the general direction of Ft. 3) Be sure the Atomic Clock is at least 6 feet from any electrical devices, i. e. 4) Remove batteries for five minutes, reinsert and leave the unit alone overnight without pressing buttons. [. . . ]