User manual LA CROSSE TECHNOLOGY WS-9013U

[. . . ] WS-9013U Wireless 433 MHz Radio-controlled Weather Station Instruction Manual Topic Inventory of Contents/Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Programming Sequence Function Keys 12/24 Hour Time Setting Time Zone Setting Daylight Saving Time Setting Time Setting (WWVB & Manual) Setting Day, Date and Year Selecting °F or °C Setting the LCD Contrast Features Indoor Temperature Outdoor Temperatures Minimum & Maximum Records (Indoor, Outdoor & Resetting) Additional Remote Temperature Sensor Units (Set-Up, Viewing & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information Page 3 4 5 6-7 7 8 8 8-9 9-10 10-11 11-12 12 13 14 14 15-16 16-17 18-19 20 20 21 22-23 2 Table Of Contents INVENTORY OF CONTENTS 1. Instruction Manual and Warranty Card. Figure 2 Time LCD Date LCD Indoor LCD Outdoor LCD Mounting Bracket Figure 1 ADDITIONAL EQUIPMENT (not included) 1. One, Philips screwdriver for mounting. 3 ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology--Time and Frequency Division) WWVB radio station is located in Ft. Collins, Colorado and transmits the exact time signal continuously throughout the United States at 60 kHz. [. . . ] Press and release the "SET" button to confirm the numericmonth, and to enter the numeric-day setting mode. The numeric-day will be flashing, press and release the "CH" button to select the current day. Press and release the "SET" button to confirm and to enter the year setting mode. The default-year will be flashing, press and release the "CH" to select the appropriate year. Press and release the "SET" button to confirm and to advance to the °F or °C setting mode. Press and hold the "SET" button for 3 seconds, or until "12h" or "24h" flashes in the DATE LCD. Press and release the "SET" button 9 times to reach the °F or °C setting mode. "MIN" appears in the upper portion of the flashing INDOOR LCD indicating that the minimum temperature and the time and date of occurrence are displayed. Press the "IN" button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the upper portion of the flashing INDOOR LCD indicating that the maximum temperature and the time and date of occurrence are displayed. While "MAX" is still displayed press the "IN" button again to return to the current data display. By waiting 20 seconds during either the minimum or the maximum readings the unit will automatically return to current data readings. 2. 3. B. "MIN" appears in the upper portion of the flashing OUTDOOR LCD, indicating that the minimum temperature and the time and date of occurrence are displayed. Press the "OUT" button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the upper portion of the flashing OUTDOOR LCD, indicating that the maximum temperature and the time and date of occurrence are displayed. While "MAX" is still displayed press the "OUT" button again to return to the current data display. By waiting 20 seconds during either the minimum or the maximum readings the unit will automatically return to current data readings. 2. 3. 15 C. All the indoor records (minimum and maximum) will be reset after the "IN" button is pressed and held for 5 seconds. All the outdoor records (minimum and maximum) will be reset after the "OUT" button is pressed and held for 5 seconds. IV. ADDING OUTDOOR REMOTE CONTROL SENDERS (OPTIONAL) The WS-9013U is able to receive signals from 3 different remote temperature sensors. The remote temperature sensor model(s) that you choose will come with their own set of instructions. Following are some brief instructions for the basic set-up of remote temperature sensor units with the WS-9013U. [. . . ] (0°C to 59. 9°C with 0. 1°C resolution) "OFL" displayed if outside this range -21. 8°F to 157. 2°F with 0. 2°F resolution. (-29. 9°C to 69. 9°C resolution) "OFL" displayed if outside this range Every 10 seconds Every 1 minute Every 5 minutes 80 feet (in open space) 2 x AA, IEC LR6, 1. 5V 2 x AA, IEC LR6, 1. 5V Approximately 12 months Alkaline 5. 5" x 3. 2" x 1. 25" (140 x 81 x 32 mm) 5. 04" x 1. 57" x 0. 9" (128 x 40 x 23 mm) 21 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. [. . . ]