User manual LA CROSSE TECHNOLOGY WS9228

[. . . ] WIRELESS 433 MHz WEATHER STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this fancy Weather Station with wireless 433MHz transmission of outdoor temperature and humidity and display of indoor temperature and humidity. It is further featuring a DCF77 radio controlled clock with date display and two alarms. With eight easy to use function keys, this innovative product is ideal for use in the home or office. FEATURES: The Weather Station LCD Display Hanging Hole Battery compartment cover Function Keys Detachable stand · · · · · · · DCF-77 Radio controlled time with manual setting options Time reception ON/OFF 12/24 hour display Hour and minute display, seconds indicated by flashing dot Time zone option ±12 hours Features 2 alarms with snooze function Snooze setting 25 · · · · · · · · · · · · · · Date and month / weekday and date calendar display selectable Weather forecasting with 3 weather icons and weather tendency indicator Weather forecasting icon sensitivity setting Temperature display in degrees Celsius (°C) or Fahrenheit (°F) selectable Indoor and outdoor temperature display with MIN/MAX recording Indoor and outdoor humidity reading displayed as RH% with MIN/MAX recordings All MIN/MAX temperature recordings show date and time received All MIN/MAX recordings can be reset Indoor comfort level indicator - happy or sad face icons Can take up to three outdoor transmitters LCD contrast setting Low battery indicator Wall mounting or table standing LED backlight · The Outdoor Thermo-Hygro Transmitter Remote transmission of outdoor temperature and humidity to weather station by 433 MHz signals Shower proof casing Wall mounting stand · · SETTING UP : 1. First, insert the batteries into the Weather Station (see "How to install and replace batteries in the Weather Station" below). [. . . ] When the signal is received, the manually set time will automaticaly be replaced by the received time. If reception has been unsuccessful, the DCF tower icon will not appear but reception will still be attempted the following hour. 38 CALENDAR SETTING Year "Date. Date. " (for 12h time display) The date default of the Weather station is 1. Once the radio-controlled time signal is received, the date is automatically updated. However, if the signal is not received, the date can also be set manually. Press the IN (or OUT) key to set the date and the OUT (or IN) key to set the month required. Confirm with the SET key and enter the "Snooze setting " or exit the setting mode by pressing the CH or SNOOZE key. SNOOZE SETTING: Snooze time The snooze time can be set OFF to a maximum time of 30 minutes (default is 10 minutes) : 1. Each pressing of the key will increase the snooze 39 2. time by 5 minutes. The snooze can also be set OFF when the "OFF" digit is being displayed. Confirm with the SET key and enter the "ºC / ºF temperature display setting" or exit the manual setting mode by pressing the CH or SNOOZE key. Note : If the snooze time has been set "OFF", the snooze function will not be activated. °C/°F TEMPERATURE DISPLAY SETTING Flashing The default temperature reading is set to °C (degree Celsius). The "°C" will be flashing, use the IN key to toggle between "°C" and "°F". Once the desired temperature unit has been chosen, confirm with the SET key and enter the "Weather Forecast Icon Sensitivity setting" or exit the setting mode by pressing the CH or SNOOZE key. WEATHER FORECASTING ICON SENSITIVITY SETTING For locations with rapid changes of weather conditions, the threshold can be set to a different level for faster display of weather conditions. Digit flashing 1. Using the IN key to set the weather sensitivity level. There are 3 levels of setting: 1, 2 and 3; level 1 is the most sensitive setting, level 3 is the least sensitive setting (default setting is "2"). 40 2. Confirm with the SET key and exit the Manual settings. ALARM SETTING : Alarm icon Alarm time 1. 6. Press and hold down the AL1 key for about 3 seconds until the alarm time display flashes. Pressing these keys continuously moves the hours consecutively by 1 hours and the minutes consecutively by 5 minutes. Either press the AL1 key once more to confirm and return to the normal display or do not touch any buttons for about 15 seconds to confirm the set time. To activate the alarm function, press the AL1 button once for Alarm 1. You should now see the ((1)) alarm symbol to represent the Alarm 1 being ON. The steps for setting, activating and de-activating Alarm 2 are the same, but using the AL2 button instead of AL1. SNOOZE SETTING AND STOPPING THE ALARM: 1. When the alarm is sounding, press the SNOOZE key to activate the snooze function. The alarm will stop and re-activate after the snooze interval of 5 minutes (for example). To stop the alarm completely, press any keys other than the SNOOZE key. 2. 41 WEATHER FORECAST AND TENDENCY The weather forecasting icons : There are 3 weather icons in the third section of LCD which can be displayed in any of the following combinations : Sunny Cloudy with sunny intervals Rainy For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. [. . . ] Before wall mounting, please check that the outdoor temperature and humidity values can be received from the desired locations. Fix a screw (not supplied) into the desired wall, leaving the head extended out about 5mm. Remove the stand from the Weather Station by pulling it away from the base and hang it onto the screw. Remember to ensure that it locks into place before releasing. 47 POSITIONING TRANSMITTER THE THERMO-HYGRO The Thermo-hygro transmitter is supplied with a holder that may be attached to a wall with the two screws supplied. [. . . ]