User manual LEXMARK PREVAIL PRO700

[. . . ] Use only the power supply and power cord provided with this product or the manufacturer's authorized replacements. Use only the telecommunications (RJ-11) cord provided with this product or a 26 AWG or larger replacement when connecting this product to the public switched telephone network. CAUTION--SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system connections) are properly installed in their marked plug-in ports. This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. [. . . ] Be sure to use the exact spelling and capitalization. 15 If Network Authentication appears in the list, select Open. 17 If necessary, clear the "The key is provided for me automatically" check box. 19 Write down the WEP key you chose so you can refer to it when running the wireless setup. Make sure you copy it down exactly, including any capital letters. 20 In the "Confirm network key" box, type the same WEP key. 21 Select This is a computer-to-computer (ad hoc) network; wireless access points are not used. 23 It may take a few minutes for your computer to recognize the new settings. To check on the status of your network: a Right-click the Wireless Network Connections icon. · If the network is listed but the computer is not connected, select the ad hoc network and then click Connect. · If the network does not appear, wait a minute and then click Refresh network list. 24 Insert the installation software CD, and follow the directions for wireless installation. Note: Do not connect the installation or network cables until instructed to do so by the setup software. 25 When the available networks are displayed, provide the network name and the security information you created beginning in step 13. The installer will configure the printer for use with your computer. 26 Store a copy of your network name and security information in a safe place for future reference. In Windows 2000 · Refer to the documentation that came with your wireless network adapter for information on configuring an ad hoc network with Windows 2000. Networking 102 For Macintosh users 1 Access the Airport settings: In Mac OS X version 10. 5 a From the Apple menu, choose System Preferences. In Mac OS X version 10. 4 and earlier a From the Finder desktop, choose Go > Applications. 3 Create a name for the ad hoc network, and then click OK. Note: Store the network name and password in a safe place for future reference. Adding a printer to an existing ad hoc wireless network Note: The printer can communicate on only one wireless network at a time. Configuring the printer for an ad hoc wireless network will remove it from any other wireless network, either ad hoc or infrastructure, for which it is configured. For Windows users 1 Click or Start. 2 Click All Programs or Programs, and then select the printer program folder from the list. 6 Follow the instructions on the computer screen. Note: Windows Vista computers may need to be reconnected to the ad hoc network after restarting. For Macintosh users 1 From the Finder desktop, double-click the printer folder. 3 Follow the instructions on the computer screen. Networking 103 Configuring the printer wirelessly using WPS (Wi-Fi Protected Setup) Wi-Fi Protected Setup (WPS) is a method of configuring computers and printers on a secure wireless network. WPS is faster than manual configuration, and it reduces typing errors when new devices are added to a wireless network. The SSID and WPA passphrase are automatically detected and configured for you. The printer supports WPS and can be configured for wireless access using WPS. In order to use WPS to configure the printer, the wireless router must also support WPS. If you want to use WPS to set up your printer, then insert the CD and follow the instructions on the computer screen. Notes: · To use WPS to configure the printer wirelessly, all of the devices on your wireless network must support WPS. If any device on your network does not support WPS, then you must type the SSID and security information when prompted. · If you are using the PIN method to add your printer using WPS, make sure you type all eight digits when you are asked to enter your PIN. Switching between USB, Ethernet, and wireless connections (Windows only) You can change the way you access your printer, depending on your needs. [. . . ] Products equipped with 2. 4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment. Compliance is indicated by the CE marking. Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only. The manufacturer of this product is: Lexmark International, Inc. , 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft. , 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative. Cesky Dansk Spolecnost Lexmark International, Inc. [. . . ]