User manual LG 27MT93V-PZ

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LG 27MT93V-PZ. We hope that this LG 27MT93V-PZ user guide will be useful to you.


LG 27MT93V-PZ : Download the complete user guide (9037 Ko)

Manual abstract: user guide LG 27MT93V-PZ

Detailed instructions for use are in the User's Guide.

[. . . ] Therefore, NEVER: Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Do not press the LCD screen with your finger for a long time as this may cause some afterimages. [. . . ] Once assembled take the monitor up carefully and face the front side Stand Body Stand Base Important This illustration depicts the general model of connection. The product may fall and get damaged or injure your foot. A4 Connecting the Display Disassembling the stand Type. Separate the stand using a screwdriver as shown in the picture. Note: Please keep the 4 screws in an accessible place for future use. 5. Pack up the product as shown in the picture. A5 Connecting the Display Disassembling the stand Type. Place the monitor face Down on the cushion or soft cloth. 3. Change your hold on the product as it follows and turn the Stand Base in the arrow direction. 4. Pack up the product as shown in the picture. A6 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~20˚ 20 Swivel : 355˚ Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. A7 Connecting the Display Using the Computer 1. Make sure to turn off the computer and product. A Connect DVI Cable B Connect Dsub Cable (PC) C Connect Dsub Cable (Mac) Analog signal Digital signal D-sub DVI Power Cord Wall-outlet type PC PC-outlet type PC DVI-D(This feature is not available in all countries. ) PC MAC Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. 2. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) NOTE ‘ Self Image Setting Function’?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. Set your own blue color levels. RED GREEN MENU : Exit - : Decrease + : Increase BLUE SET : Select another sub-menu POSITION POSITION HORIZONTAL VERTICAL To move image left and right. To move image up and down. MENU : Exit - : Decrease + : Increase SET : Select another sub-menu A15 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description TRACKING TRACKING CLOCK To minimize any vertical bars or stripes visible on the screen background. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. PHASE MENU : Exit - : Decrease + : Increase SHARPNESS To adjust the clearness of the screen. . . . RCM(Real Color Management): Selects the color mode. 0 1 2 3 To adjust the USER sub-menu function, Press the SET Button Not applied Green enhance Flesh tone Color Enhance Select the SAVE sub-menu using the SET button and save the YES value using the buttons. NORMAL This is under normal operating conditions. A17 Troubleshooting Check the following before calling for service. No image appears ● Is the power cord of the • Check and see if the power cord is connected properly to the power outlet. • Press the Power button. ● Is the power on and the • Adjust the brightness and the contrast. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. ● Do you see an "OUT OF • This message appears when the signal from the PC (video card) is out of horizontal or vertical RANGE" message on frequency range of the display. 'Specifications' section of this manual and configure your display again. ● Do you see a "CHECK SIGNAL CABLE" message on the screen?• This message appears when the signal cable between your PC and your display is not connected. [. . . ] • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. • Make sure the power voltage is high enough, It has to be higher than AC100-240V 50/60Hz. ● The screen blinks. Have you installed the display driver? ● Have you installed the display driver? [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LG 27MT93V-PZ




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG 27MT93V-PZ will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.