User manual LG HBM-550 CARACTERISTIQUES TECHNIQUES

[. . . ] When the handset and HBM - 550 are brought back within the required distance, the HBM-550 will automatically reconnect with the handset. - If the headset and handset do not automatically reconnect when they are back within the required range, briefly press the PWR/END button to reconnect manually. Volume control - Briefly press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume. Calling Answering a call - When there is an incoming call, the Headset will ring. [. . . ] Transferring a call* - While on a call on your handset, briefly press the PWR/END button on the HBM-550 to transfer the audio to the headset. - And to transfer a call from the Headset to Handset, press and hold VOLUME UP button for 5 seconds. Call waiting* - Answer a second call without hanging up the first call by pressing the PWR/END button for 1seconds. Call reject* Activate call reject by pressing the PWR/END button for 1 second when receiving a call. * It is possible to use these functions only when your Handset supports them. For further information about using these features please consult your Handset's user manual. 8 Summary of button functions Function Power on Power off Volume up Volume down Transferring a call HBM-550 Status Action Press the PWR/END button for at least 2 seconds Press the PWR/END button for at least 5 seconds Briefly press the Volume Up button Briefly press the Volume Down button - Handset to Headset Briefly press the PWR/END button - Headset to Handset Press and hold the VOLUME UP button for 5 seconds Briefly press the PWR/END button Briefly press the PWR/END button Press the PWR/END button for 1 second Press the PWR/END button for 1 second Briefly press the PWR/END button Press the PWR/END button for 1 second Press the PWR/END button for 5 seconds Power off Power on Talking Talking Talking Answering a call Ending a call Call waiting Last number redialing Voice dialing (Handset must support) Call reject Pairing mode Ringing Talking Talking Idle Idle Ringing Power off LED indication Function Operating HBM - 550 Status Power on Power off Pairing mode LED Status Charging The blue LED light flickers fast 5 times. Headset / Handsfree The blue LED light flickers twice every Profile Connected 5 seconds. Unintentional Link Loss The purple (blue and red) LED light (until the lost link is recovered) flickers once every 5 seconds. Charging complete The red LED is turned off. 9 Troubleshooting Precautions Does not turn on Check whether the battery of the HBM - 550 is fully discharged. Unable to communicate Check whether the Handset with the HBM - 550 supports the Headset or Handsfree Bluetooth® Profiles. Check whether the battery of the HBM - 550 is low Unable to pair the Check and make sure the HBM-550 with the Headset is on. Bluetooth® device Check and make sure the Headset is placed in pairing mode. Low sound (speaker) Charge the battery. Determine whether your Handset supports the Headset, or Handsfree profiles. Charge the battery. Do not drop the unit from high places. + _ Press the PWR/END button for at least 2 seconds to turn on the Headset. With the power off, press and hold the PWR/END button for at least 5 seconds to place the Headset in pairing mode. lncrease the volume level. Do not modify, repair, or take apart. + _ Do not expose directly to water, alcohol, benzene, etc. for cleaning. + _ Specification Do not expose directly to flammables. + _ ITEM Bluetooth® Specification Battery Standby Time Talk Time Charging Time Operation Temperature Dimension / Weight Description V2. 0 (Handsfree / Headset profiles) 3. 7V, Li - Polymer Up to 150Hrs Up to 4Hrs 2Hrs -10 ~ 60 18. 8(W) x 41(L) x 10. 6(H) / 10. 5g Do not place or keep the unit near flammables. + _ 10 11 Precautions Declaration of Confirmation FCC NOTICE TO USERS : Keep unit away from humidity & dust. + This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. _ IMPORTANT NOTE : To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device. Do not place the heavy objects on the unit. + _ Additional Information 1. Radio frequency exposure This Bluetooth® Headset, HBM -550, is a radio transmitter and receiver. [. . . ] A new battery or one that has not been used for a long period of time could have reduced capacity the first few times it is used. Do not expose the battery to extreme temperatures, never above +60 (+140 or under -20 F). F) (-4 For maximum battery capacity, use the battery in room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. [. . . ]