User manual LG L1753HR

[. . . ] During a lightning storm or when the display is to be left unattended for an extended period of time, unplug it from the wall outlet. A1 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. [. . . ] However, be aware that this option initializes all the menu items except ‘Language’. A9 Using the speakers - The feature is only for speaker models - L1753HM, L1953HM Side Jack Headphone/Earphone Input Automatically mutes the speaker volume when the headphones are plugged in. Rear Audio Input Connects to the *LINE OUT jack of the PC sound card. AUDIO IN Speaker Out *Line Out <Jack of the PC sound card> A10 Control Panel Functions Front Panel Controls Side Control MENU Button Function Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. Buttons Use these buttons to select or adjust functions in the On Screen Display. For more information, refer to page A18. SOURCE Hot key Use this button to make D-Sub or DVI connector active. The default setting is D-Sub. A11 Control Panel Functions Control AUTO/SET Button Function Use this button to enter a selection in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is 17 inch monitor : 1280 x 1024 19 inch monitor : 1280 x 1024 Power Button Use this button to turn the display on or off. Power Indicator This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber. A12 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: Press the MENU Button, then the main menu of the OSD appears. When the icon you want becomes highlighted, press the AUTO/SET Button. Push the MENU Button once to return to the main menu to select another function. To move image up and down. MENU : Exit : Decrease : Increase SET : Select another sub-menu A16 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description TRACKING TRACKING CLOCK To minimize any vertical bars or stripes visible on the screen background. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. PHASE MENU : Exit : Decrease : Increase SHARPNESS To adjust the clearness of the screen. SET : Select another sub-menu SETUP SETUP LANGUAGE OSD POSITION WHITE BALANCE To choose the language in which the control names are displayed. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set ON at any time, the power indicator will automatically be turned on. [. . . ] Input Form Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital L1753HM Sync Input Video Input Signal Input Input Form 15 pin D-Sub Connector DVI - D connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz VESA 1280 x 1024 @60 Hz : 30 W (Typ. ) ≤ 1W ≤ 1W Resolution Max Recommend Plug&Play DDC 2B Power 0n Mode Consumption Sleep Mode (Without Speaker) Off Mode Dimensions &Weight With Stand Without Stand Width 36. 44 cm / 14. 34 inches 36. 44 cm / 14. 34 inches Height 39. 09 cm / 15. 39 inches (Min) 34. 00 cm / 13. 39 inches 45. 09 cm / 17. 75 inches (Max) Depth 20. 74 cm / 8. 17 inches 5. 80 cm / 2. 28 inches Net 3. 88(+0. 085) kg (8. 62 lbs) Tilt -5˚~20˚ AC 100-240V~ 50/60Hz 0. 8A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type RMS Audio Output 1W+1W(R+L) Input Sensitivity 0. 7Vrms Speaker Impedance 16Ω Tilt Range Power Input Environmental Conditions Stand Base Power cord Audio NOTE Information in this document is subject to change without notice. A23 Specifications Display L1953H / L1953HR 19 inches (48. 19 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0. 294 mm pixel pitch Horizontal Freq. Input Form Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital 15 pin D-Sub Connector DVI - D connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz VESA 1280 x 1024 @60 Hz : 33 W (Typ. ) ≤ 1W ≤ 1W With Stand Width Height Depth Net 40. 20 cm / 15. 83 inches 36. 47 cm / 14. 36 inches(Min) 46. 47 cm / 18. 30 inches(Max) 20. 74 cm / 8. 17 inches Sync Input Video Input Signal Input Input Form Resolution Max Recommend Plug&Play Power Consumption Dimensions &Weight DDC 2B 0n Mode Sleep Mode Off Mode Without Stand 40. 20 cm / 15. 83 inches 33. 30 cm / 13. 11 inches 5. 80 cm / 2. 28 inches 4. 51(+0. 085) kg (10. 02 lbs) Tilt Range Power Input Environmental Conditions Tilt -5˚~20˚ AC 100-240V~ 50/60Hz 0. 8A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type Stand Base Power cord NOTE Information in this document is subject to change without notice. A24 Specifications Display 19 inches (48. 19 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0. 294 mm pixel pitch Horizontal Freq. Input Form Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital L1953HM Sync Input Video Input Signal Input Input Form 15 pin D-Sub Connector DVI - D connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz VESA 1280 x 1024 @60 Hz : 33 W (Typ. ) ≤ 1W ≤ 1W With Stand Without Stand Resolution Max Recommend Plug&Play Power Consumption (Without Speaker) Dimensions &Weight DDC 2B 0n Mode Sleep Mode Off Mode Width Height Depth Net 40. 20 cm / 15. 83 inches 40. 20 cm / 15. 83 inches 40. 60 cm / 15. 98 inches(Min) 36. 75 cm / 14. 47 inches 46. 60 cm / 18. 35 inches(Max) 20. 74 cm / 8. 17 inches 5. 80 cm / 2. 28 inches 4. 70(+0. 085) kg (10. 36 lbs) -5˚~20˚ Tilt Range Power Input Environmental Conditions Tilt AC 100-240V~ 50/60Hz 0. 8A Operating Conditions Temperature 10˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type RMS Audio Output Input Sensitivity Speaker Impedance 1W+1W(R+L) 0. 7Vrms 16Ω Stand Base Power cord Audio NOTE Information in this document is subject to change without notice. A25 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 *12 **13 VGA VGA VGA VESA VESA VESA MAC VESA VESA MAC VESA VESA VESA 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 31. 469 31. 468 31. 469 37. 500 37. 879 46. 875 49. 725 48. 363 60. 023 68. 681 61. 805 63. 981 79. 976 70 70 60 75 60 75 75 60 75 75 65 60 75 * Recommend Mode ** Only Analog Mode Indicator MODE LED Color On Mode Sleep Mode Off Mode Blue Amber Off A26 Specifications Signal Connector Pin Assignment 1 9 17 8 16 24 DVI-D Connector Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Signal(DVI-D) T. [. . . ]