User manual LG LSW900

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LG LSW900. We hope that this LG LSW900 user guide will be useful to you.


LG LSW900 : Download the complete user guide (1884 Ko)

You may also download the following manuals related to this product:

   LG LSW900 (2949 ko)

Manual abstract: user guide LG LSW900

Detailed instructions for use are in the User's Guide.

[. . . ] Color Video Network Camera User Manual Model: LSW900 LSW901 AB28 Before connecting, operating or adjusting this product, please read this user manual carefully and completely. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Note: The available total time of pattern differs depending on connected PTZ device and operation. 34 Operation and settings > To play the pattern 1. Note: If you set the HOME position, check the [Set home position] option. 2. Preset list Displays the registered preset position. · Add: Click to add the preset position. Repeat the steps 1-4 to add other positions. Select the preset from the list. Preset tour list A preset tour is composed of a group of preset positions that the operator can link together in a sequence. 35 Operation and settings > To tour the preset positions 1. Note: If you control the PTZ or OSD, the preset tour will be stopped. Network settings Basic · Remove: Click to delete the selected preset in the [Preset tour list]. General > MAC address: Displays the MAC address. Port & Encryption > Web port: The default HTTP port number (80) can be changed to any port within the range 1025-65535. 36 Operation and settings > RTSP port: Check RTSP port and the default port is 554. Note: The RTSP port number should not be same with the web port number. RTP stream RTP (Real-time Transport Protocol) is an internet protocol that allows programs to manage the real-time transmission of multimedia data, via unicast or multicast. > TTL > ARP Ping > Enable ARP Ping to configure IP address: Check to enable ARP ping. · Save: Click this button to confirm the settings. 37 Operation and settings Master / Slave > RTP unicast: When enabled the transmission of the data to the specified equipment happens on a network specifying a single address. > RTP multicast: When enabled it reduces the transmission load on the camera by making the computer of the same segment network receive the same transmission data. When multicast option is checked then select Video Port number, Audio Port number and Data port number. Video RTP port: Specify the video transmission port number used for the multicast streaming. It is initially set to 8888 and you can edit this between 1025 and 65534. Audio RTP port: Specify the audio port number used for the multicast streaming. It is initially set to 7777 and you can edit this between 1025 and 65534. Data RTP port: Specify the VA data port number used for the multicast streaming. It is initially set to 6666 and you can edit this between 1025 and 65534. Note: Each stream using multicast needs its own a pair of multicast IP address and port numbers to avoid address conflict. - 38 Operation and settings TCP/IP Note: You should register the SMTP server on the Event server setting to set this function. > Statically set: Select this option when you set a fixed IP address, with this setting, specify the IP address, Subnet mask and default gateway manually. DNS server status > DNS server: Enter the Primary domain name server that translates the hostnames into IP address. [. . . ] If the images appear to have white of gray stripes on it, upgrade the Video graphics driver on the client PC to the latest version. Video images may be noisy if you are using the camera in a very low light environment or the bit rate/ quality is set to very low values. Provide higher values for quality and support the surrounding environment with enough light. Audio condition · The client computer that is interacting with the camera needs to have a sound card that is functional to support speaker and microphone. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LG LSW900




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG LSW900 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.