User manual LG LWM24

[. . . ] Releasing refrigerant into the atmosphere also damages the environments. x Please recycle or dispose of the packaging material for this product in an environmentally responsible manner. OTHERS x Never store or ship the air conditioner upside down or sideways to avoid damage to the compressor. x The appliance is not intended for use by young children or infirm persons without supervision: Young children should be supervised to ensure that they do not play with the appliance. x Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency. E-2 Contents x PREPARING YOUR AIR CONDITIONER s Safety Precautions . [. . . ] Result: x The indoor unit beeps each time you press the x The air conditioner runs in the Cool mode. You can change modes at any time. Note 3 To adjust the temperature, press the buttons on the remote control or buttons on the control panel one or more times until the required temperature is displayed. Result: x Each time you press the buttons: - The temperature is adjusted by 1OC. x The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature. x If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating. 4 Select the fan speed by pressing the button on the remote control or button one or more times until the required setting is displayed : Automatic(rotated : Low High Turbo Result: x Each time you press the button, the indoor unit beeps. ) 5 To control the direction of the air flow, refer to page 16. E-9 Heating Your Room You must select the Heat mode if you wish to adjust the : x Heating temperature x Fan speed when heating 1 If necessary, press the Result: (On/Off) button. x The power indicator on the control panel comes on. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Switched on x Stopped lt will start up normally after three minutes. IMPORTANT 2 If the is not displayed on the control panel, press the remote control one or more times until it appears. Result: Note x The indoor unit beeps each time you press the x The air conditioner runs in the Heat mode. You can change modes at any time. button on the button. 3 To adjust the temperature, press the buttons on the remote control or buttons on the control panel one or more times until the required temperature is displayed. Result: x Each time you press the buttons: - The temperature is adjusted by 1°C. x The air conditioner starts heating, provided that the room temperature is lower than the selected temperature. You can change modes at any time. button on the button. 3 Select the fan speed by pressing the until the required setting is displayed: Low High Turbo Result: x Each time you press the button one or more times button, the indoor unit beeps. 4 To control the direction of the air flow, refer to page 16. E-15 Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit your room, you can adjust the position of the outer air flow blade on the upper part of the unit, thus increasing the efficiency of the air conditioner. 1 Press the Result: button. Downwards. RECOMMENDATION 2 To stop the blade moving up and down, press the button again. Adjusting the Air Flow Direction Horizontally There are two sets of air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blade can be adjusted horizontally. 1 Press the Result: button. x The inner blade moves right and left. 2 To stop the blade moving right and left, press the Note button again. x You can't control the airflow direction horizontally in the Long Function. x You can't control the airflow direction when the fan doesn't operate in the Heat mode. E-16 Setting the Off Timer ENGLISH The Off Timer enables you to switch off the air conditioner automatically after a given period of time. To set the operating time, press the button one or more times until the required time is displayed. Result: x After blinking of the timer indicator for 5 seconds, it will be changed to temperature setting. x The air conditioner will switch off automatically after the set time and the Off Timer indicator disappears. Note You can see or change the setting mode and/or the temperature by pressing the button or the buttons after setting the Off Timer. To Cancel the Off Timer Press the disappears. button one or more times until the Off Timer indicator E-17 Other Function You can use the Lock function on the control panel of the indoor unit. 1 Press the Result: x buttons simultaneously for 3 seconds. Note You can use the remote control even if the control panel is locked. [. . . ] IMPORTANT Before cleaning your air conditioner, ensure that you have switched off the breaker for the unit. 1 Open the front grille, then pull out the air filter. 2 Remove all dust on the air filter with a vacuum cleaner or brush. 3 When you have finished, insert the air filter into the original position and close the front grille. 4 Clean the unit with a damp cloth and mild detergent (do NOT use benzene, solvents or other chemicals). If you have not used the air conditioner for a long period of time, set the fan going for 3 to 4 hours to dry the inside of the air conditioner thoroughly. Note E-21 Solving Common Problems Before contacting the after-sales service, perform the following simple checks. Problem The air conditioner does not operate at all Explanation/Solution x Check that the breaker used for the air conditioner is switched on. x Check that the indoor unit is turned on; if necessary press the (On/Off) button on the remote control. [. . . ]