User manual LIFESCAN ONETOUCH II
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LIFESCAN ONETOUCH II. We hope that this LIFESCAN ONETOUCH II user guide will be useful to you.
You may also download the following manuals related to this product:
LIFESCAN ONETOUCH II (842 ko)
Manual abstract: user guide LIFESCAN ONETOUCH II
Detailed instructions for use are in the User's Guide.
[. . . ] ®
BLOOD GLUCOSE MONITORING SYSTEM
a company
Owner's Booklet
Dear ONE TOUCH® II System Owner: Congratulations!You've chosen a very easy-to-use blood glucose monitoring system for home testing. Your ONE TOUCH II System will give you the accurate test results you need, just by following a few simple steps. Everything you need to know about using the ONE TOUCH II System is included in this booklet. [. . . ] There are no test results stored in the memory.
nodata
MESSAGE n 225
(example)
WHAT IT MEANS The total number of tests (blood, check strip, and control solution) stored in the memory. The average of all blood glucose tests stored in the memory over the past 14 days. There are no blood glucose results in the memory or the results are more than 14 days old. 39
MESSAGE 135 event6
(example)
WHAT IT MEANS A blood glucose test result marked with an event number. A blood glucose test result stored in the memory for a test done March 30, 1999, at 3:21 PM. 99 3: 21pm 107 event5
(example)
av---
What to Do If You Think Your Test Results Are Wrong
If you think you are getting inaccurate results, do a check strip test and a control solution test to check the meter, test strips, and your procedure. After performing these checks, if your results still are not consistent with how you feel, call your doctor or healthcare professional. There are several reasons why your test result may be wrong: You may not have applied enough blood. The code number on the meter display doesn't match the code on the test strip vial. Check the expiration date on the test strip vial, and discard the test strips if out of date. The test strip vial was opened for the first time more than four months ago. The test strips were stored at an extremely high temperature (above 86°F or 30°C). The test was performed outside of the acceptable operating conditions for testing. The ONE TOUCH® II Meter may be used between 59°F and 95°F (15°35°C), with relative humidity under 90%.
The test strip holder and test area are dirty. The test result number is below 33. 4 and the letters MM appear before the result. This means you may have accidentally switched from mg/dL to mmol/L, the unit of measure used in Canada and other countries. You may have a special physical condition, such as extreme dehydration, that is affecting your results. TAKING CARE OF THE METER
Infection Control Information
To reduce the risk of infection: If you are sharing the ONE TOUCH® II Meter with another person, always use a new or properly disinfected test strip holder for each person. If you are sharing the PENLET® II Automatic Blood Sampler with another person, always use a new, sterile lancet and a new or properly disinfected PENLET ® II Cap for each person. For disinfecting information, an additional test strip holder, or a PENLET II Cap, please call LifeScan Customer Services. However, it must be handled carefully and cleaned often to remain in 42 good operating condition. You should follow these rules at all times: Keep the test strip holder and test area clean. [. . . ] The warranty policy applies only to the original purchaser of this meter and does not include the battery supplied with the meter.
Before you return your meter, or any product for warranty replacement, first call your LifeScan Customer Services Representative at the toll-free number for detailed instructions. The ONE TOUCH II Meter has a full five-year warranty from the original date of purchase. Write your date of purchase here: ____________________
74
The warranty policy does not apply to the performance of the ONE TOUCH® II Meter when used with any test strip other than ONE TOUCH® Test Strips, or when the ONE TOUCH II Meter or ONE TOUCH Test Strips are changed or modified in any way. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular purpose.
75
9. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LIFESCAN ONETOUCH II
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LIFESCAN ONETOUCH II will begin.