User manual LIFESCAN ONETOUCH SURESTEP QUICK REFERENCE GUIDE

[. . . ] Make sure a test strip is not in the meter when you turn it on. Pink Test Square White Pad Confirmation Dot Blood Glucose Monitoring System Front Back Back 2. Check confirmation dot on back of test strip and make sure it is completely blue. Pink test square is where you apply a drop of blood. White pad absorbs the excess blood that may extend beyond the pink test square. [. . . ] Result is over 500 mg/dL. * Match meter code with the code on the bottle. ERROR WHAT TO DO ERROR Error 2 continued E R R O R M ESSAG ES WHAT TO DO Apply the sample to the pink test square only. Make sure the confirmation dot turns ERROR WHAT TO DO ERROR WHAT TO DO 1. Repeat the test with a new test strip and: blood to the pink test square only. Note: If you continue to get any error message, compare the color of the test strip confirmation dot to the Color Chart on the test strip bottle. If the glucose level is very low (50 mg/dL) or very high (350 mg/dL), follow the advice of your Healthcare Professional. If these actions do not resolve the error, call LifeScan Customer Services at 1 800 227-8862. Apply 1. Repeat the test with a new test strip and: If you use bleach to disinfect the meter, before completely blue. Wait approximately 1 minute, but not more than 2 minutes, after applying sample before inserting the test strip into the meter. Note: If you continue to get any error message, compare the color of the test strip confirmation dot to the Color Chart on the test strip bottle. If the glucose level is very low (50 mg/dL) or very high (350 mg/dL), follow the advice of your Healthcare Professional. If these actions do not resolve the error, call LifeScan Customer Services at 1 800 227-8862. the meter and test strip are at room temperature. Note: If you continue to get any error message, compare the color of the test strip confirmation dot to the Color Chart on the test strip bottle. If the glucose level is very low (50 mg/dL) or very high (350 mg/dL), follow the advice of your Healthcare Professional. If these actions do not resolve the error, call LifeScan Customer Services at 1 800 227-8862. Error 6 retesting, wipe the meter and contact points with a cloth moistened with water to remove residual bleach and thoroughly dry the meter. [. . . ] If the glucose level is very low (50 mg/dL) or very high (350 mg/dL), follow the advice of your Healthcare Professional. If these actions do not resolve the error, call LifeScan Customer Services at 1 800 227-8862. compare the color of the test strip confirmation dot to the Color Chart on the test strip bottle. If the glucose level is very low (50 mg/dL) or very high (350 mg/dL), follow the advice of your Healthcare Professional. [. . . ]