User manual LIFT-MASTER 200LM

[. . . ] OWNERS MANUAL Model 200 Lift- Master Universal Receiver Manufactured under 1 or more of the following US patents: 3, 445, 848; 3, 906, 348; and 4, 037, 201 SPECIFICATIONS If power is other than shown in specifications, Output Rating . . . . . . . . . . . . . . . . . . [. . . ] Select a location that allows access to the terminals and space for the antenna (as far from metal structures as possible and preferably in a vertical position). FIGURE 1 - WITHOUT TRANSFORMER: Connect bell wire (not supplied) to receiver terminals 1 and 2, and to operator radio power terminals. (On operators with the terminals labeled 1, 2 and 3, it will usually be 1 and 3). Also, connect the bell wire to receiver terminal 4 and operator terminal 2. FIGURE 2 - WITH TRANSFORMER MODEL 85: Receiver terminals 1 and 2 are not used. Connect bell wire to receiver terminals 3 and 4 and to operator relay control terminals 1 and 2. The transformer plugs into a 120V outlet ___________________________________________________________________________________________________ SETTING THE CODE IN RECEIVER AND TRANSMITTER(S) Pry open the receiver cover and locate the 9 code switches. With a screwdriver or a pen, slide one or more of the receiver code switches to a plus, center (0) or minus position. [. . . ] ACCESSORIES Model 85 Transformer Model 86 Coaxial Cable Kit 114A1025C Printed in Mexico [. . . ]