User manual LIFT-MASTER 65 6202
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LIFT-MASTER 65 6202. We hope that this LIFT-MASTER 65 6202 user guide will be useful to you.
Manual abstract: user guide LIFT-MASTER 65 6202
Detailed instructions for use are in the User's Guide.
[. . . ] HAND CRANK MODIFICATION
APPLICATION
Replaces operator hand chain wheel and chain with hook and eyelet connection for extended floor level hand crank. [. . . ] Drill a 1/4" diameter hole through each end of the rigid pipe, 1/2" from the end. Attach the eye and winding brace to the ends of the pipe with the screws and nuts provided (Figure 2). NOTE: If an extended Hand Crank Kit was requested refer to instructions on back page before going onto next step. Connect the hand crank hook shaft in the same manner that the eye is connected to the rigid pipe.
Winding Brace
CRANK OPERATION
1. Pull the door operator disconnect chain down and lock in place on the chain retaining bracket (Refer to operator owner's manual). Slip the eye end of the hand crank over the hook on the extended shaft of the operator and rotate the handle to manually raise or lower the door (Figure 3).
FIGURE 2
Eye
FIGURE 3
1/4" Nut
1/4" Screw
Hand Crank Hook Shaft Disconnect Chain
1/2" Pipe
1
(OPTIONAL) HAND CRANK EXTENSION
1. [. . . ] FIGURE 4
Hook Shaft
Hex Bolt 5/16-18 x 2"
Lock Nut 5/16"
Shaft Coupling
Extension Shaft 30"
Hook (See Step 4)
01-13035B
© 2005, The Chamberlain Group, Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LIFT-MASTER 65 6202
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LIFT-MASTER 65 6202 will begin.