User manual LIFT-MASTER 96LM

[. . . ] WARNING Model 96LM Security PlusTM 3-Channel Remote Control OWNER'S MANUAL The 90 Series remote control (with yellow battery test light) works only with door openers and light controls having an orange "Smart" button and a yellow indicator light. [. . . ] THERE ARE NO OTHER USER SERVICEABLE PARTS. Model 96LM Security Plus Remote Control Yellow Battery Indicator Light Garage Door Opener with "Smart" Button 1 2 3 Security PlusTM Garage Door Openers To Program the Opener to Accept the Remote Control Code Select a remote control push button to operate the opener. The indicator light on the panel will begin to blink and the opener lights will flash once. Now the opener will operate when that remote control button is pressed. Test it by pressing the remote button to see that the door goes up and down. Adding a remote can also be done from the door control, as follows: 1. To Erase All Remote Control Codes Press and hold the "Smart" button on the opener panel until the indicator light turns off (about 6 seconds). Replacement Parts Model 96LM Security Plus remote case, cover, screw . . 10A14 9 7 5 3 1 9 7 5 3 1 KG KG Select a push button "Smart" Button Indicator Light Figure 1 Figure 2 To Control the Opener Lights With Security Plus transmitters, a remote push button can be programmed to operate the opener lights without opening the door. [. . . ] Press the third (Stop) button while the door is moving and it should stop immediately. FOR SERVICE DIAL OUR TOLL FREE NUMBER: 1-800-528-9131 114A2071 © 1996, Chamberlain Group Inc. [. . . ]