User manual LINE 6 FLEXTONE CAB

[. . . ] This satellite speaker cabinet is designed for use with the Flextone Plus Digital Guitar Amplifier System from Line 6. [. . . ] Connect the other end of the speaker cable to the jack on the back of your new Flextone Cab. Then power up the Flextone Plus, and you're ready to rock the world with your 100 Watt stereo amplification and effects rig. Take a peek at the other side of this User Guide for pictures. The Flextone Cab is designed for stacked or side-by-side configurations with your Flextone Plus. Put your Flextone Plus on top of the Flextone Cab for a tall setup with a small footprint on stage or in your practice room or studio. For ultra-wide stereo, you can use a longer speaker cable to connect the Plus and Cab. Be sure to use a high quality, unshielded cable, wired straight-thru, tip-to-tip and sleeve-to-sleeve. If you run into any problems, flip to the section on technical support in the back of your Flextone Manual, and you'll find the information you need to contact us. That's about it. [. . . ] www. line6. com REAR OF FLEXTONE CAB REAR OF FLEXTONE PLUS SPEAKER OUTS CONNECT INCLUDED CABLE HERE EXTERNAL INTERNAL OR COMPACT STACK [. . . ]