User manual LYNX 4VF340ND
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LYNX 4VF340ND. We hope that this LYNX 4VF340ND user guide will be useful to you.
You may also download the following manuals related to this product:
LYNX 4VF340ND annexe 1 (1090 ko)
Manual abstract: user guide LYNX 4VF340ND
Detailed instructions for use are in the User's Guide.
[. . . ] 9000 133 959 (8511)
en
Index
4 6 7 8 9 10 11 14 Programme overview . .
en
Safety instructions
Delivery
Immediately check the packaging and dishwasher for any damage which may have been caused in transit. Please dispose of packaging material properly: D The corrugated cardboard consists mainly of waste paper. D The polyethylene film (PE) consists partly of secondary raw material. [. . . ] Type of food remains Soups, casseroles, sauces, potatoes, pasta, rice, eggs, roast or fried food a lot stuck on hard
Mixed
Soups, potatoes, pasta, rice, eggs, roast or fried food
Coffee, cakes, milk, sausage, cold drinks, salads very little
Amount of food remains Condition of food remains Wash programme
a little
Rinse off if the dishes have been stacked for several days in the dishwasher prior to washing.
loosely attached
Intensive 70°
Normal 65°
Eco 50°
Quick 35°
Pre-rinse
Programme sequence
Pre-rinse 50° Wash 70° First rinse Second rinse Third rinse Rinse-aid 70° Drying
Pre-rinse Wash 65° First rinse Second rinse Rinse-aid 70° Drying
Pre-rinse Wash 50° Main rinse Rinse-aid 65° Drying Wash 35° Main rinse Rinse-aid 55°
Pre-rinse
Programme selection
The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc. , as well as the amount and condition of food remains, with the details contained in the programme overview. You will find the appropriate programme information in the introduction. If only a small number of dishes have been loaded into the dishwasher, selecting a programme that operates at the next lowest temperature will usually suffice.
End of programme
The programme has come to an end when the PROGRAMME END indicator 4 and the indicator for the selected programme are both lit up. This function can be changed as follows: Hold down the function button C and switch on the main switch 1 . Each depression of function button C changes the buzzer in 4 stages (from off to loud). The setting is stored.
Programme specifications
The programme specifications can be found in the summary of instructions. Greater deviations may occur due to: varying amounts of dishes water supply temperature water pipe pressure ambient temperature mains voltage tolerances and the tolerances specific to the appliance (e. g. temperature, amount of water, etc. ) The water consumption values refer to a set water hardness value of 2.
Switching the dishwasher OFF
Several minutes after the programme has ended: Open the door when the programme has ended. (Does not apply when Aqua-Stop unit has been fitted) Remove dishes, etc. when they have cooled down.
Switching the dishwasher ON
Turn on the tap. Indicators light up according to the last programme that was selected. This same programme will run again if no other programme button 8 is pressed For appliances with top basket feature: If only the top basket is loaded, press the top-basket button 3 . The programme starts automatically.
18
en
Programme interruption
Carefully open the door, it could happen that water splashes out of the appliance. If the programme is already in "drying" mode, an acoustic signal reminds you to close the appliance door or to abort the programme. If warm water is connected or if the machine is already heated up and the appliance door has been opened, leave the door slightly ajar, then close it, otherwise the appliance door can jump open through the expansion. In order to continue the programme flow, switch the main switch ON again and close the door.
Maintenance and care
A regular inspection and maintenance of your machine will help to prevent faults. Therefore you should occasionally have a careful look inside your dishwasher.
Overall condition of the machine
Check spray arm for grease and limescale deposits. If you find such deposits: Fill the detergent dispenser with detergent, start the appliance without utensils in the programme which has the highest wash temperature. Clean the appliance with detergents/ appliance cleaners which are particularly suitable for use with dishwashers. Regularly wipe the front of the appliance and panel with a damp cloth; water and a little washing-up liquid will suffice. Do not use sponges with a rough surface or abrasive detergents, as these could scratch the surfaces. Health hazard!
Cancel programme (Reset)
Only when the master switch is ON. [. . . ] Please contribute to a better environment by disposing of packaging materials in an environmentally-friendly manner. All plastic parts of the appliance are identified by internationally standardised symbols (e. g. When the appliance is being disposed of, the plastic waste can be sorted for environmentally-friendly recycling. Please ask your dealer or inquire at your local authority about current means of disposal.
Transporting the dishwasher
Drain water from the dishwasher. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LYNX 4VF340ND
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LYNX 4VF340ND will begin.