User manual LYNX 4VN170BA
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LYNX 4VN170BA. We hope that this LYNX 4VN170BA user guide will be useful to you.
Manual abstract: user guide LYNX 4VN170BA
Detailed instructions for use are in the User's Guide.
[. . . ] 5600 09000
041 494 (8211)
Instructions for use
en
Index
4 6 7 8 9 10 11 Detergents . Filling the special salt container Filling the rinse-aid container Unsuitable dishes . .
en
Safety instructions
Delivery
Immediately check the packaging and dishwasher for any damage which may have been caused in transit. The wooden frames (if fitted) are made of residual wood and are untreated. [. . . ] If your dishes are only moderately dirty, you may be able to use less detergent than recommended. Press down the lid (1) until it clicks shut (2).
CAUTION IMPORTANT NOTE ON THE USE OF COMBINED CLEANING PRODUCTS
Please note the following when using "combined cleaning products" which eliminate the need for a rinsing agent or salt, for example: Some products with a built-in rinsing agent are only used to their full effect in certain programmes. This type of product does not generally produce the desired effect with automatic programmes. Products which eliminate the need for regeneration salt can only be used within a certain water hardness range. If you wish to use these combined products, please read the instructions carefully and heed any notes on the packaging. Contact the manufacturer of the cleaning agent if you have any questions, particularly if: the crockery is very wet once the programme has finished. Any problems which arise as a direct result of the use of these products are not covered by our warranty.
If you are using detergent in tablet form, read the manufacturer's recommendations on the packaging in order to determine where the tablets should be placed inside the dishwasher (e. g. Make sure that the lid on the detergent compartment is closed, even if you are using tablets.
14
en
Programme overview
This overview lists the max. The programmes supplied with your appliance are indicated on the fascia. Type of food remains Soups, casseroles, sauces, potatoes, pasta, rice, eggs, roast or fried food a lot stuck on hard
Mixed
Soups, potatoes, pasta, rice, eggs, roast or fried food a lot a little
Soak with water if dishes have been left inside dishwasher for several days before they are washed
Amount of food remains Condition of food remains
loosely attached
Wash programme
Intensive 65°
Normal 65°
Eco 65°
Pre-rinse
Programme sequence
Pre-rinse 65° Pre-rinse Wash 65° Intermediate rinse Rinse-aid 65° Drying Pre-rinse Wash 65° Intermediate rinse Rinse-aid 65° Drying Wash 65° Intermediate rinse Rinse-aid 65° Drying
Pre-rinse
Programme selection
The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc. , as well as the amount and condition of food remains, with the details contained in the programme overview. If only a small number of dishes have been loaded into the dishwasher, selecting a programme that operates at the next lowest temperature will usually suffice.
15
en
Programme data
The programme data (duration, energy and water consumption) can be found in the summary of instructions and refers to standard conditions. Greater deviations may be caused by: different quantities of utensils inlet temperature of the water water pressure ambient temperature mains voltage tolerances and appliance-specific tolerances (e. g. temperature, water flow rate, etc. ) The water consumption values refer to water hardness value 2.
Washing the dishes
Switching on the appliance
Turn on the tap fully. Select a programme with the programme selector 1 (rotate in a clockwise direction only). The programme starts.
Programme sequence indicator
While the dishes are being washed, the programme selector rotates in a clockwise direction and indicates how far the programme has progressed.
End of programme
The programme has ended when the pump noise is no longer audible and the programme selector has reached its initial position (12 o'clock position).
Switching the dishwasher OFF
Several minutes after the programme has ended: Set the main switch 5 to OFF. (Does not apply when AquaStop unit has been fitted) It is not necessary to reset the programme selector. when they have cooled down.
16
en
Interrupting the programme
Set the main switch 5 to OFF. If the hot water was switched ON or the appliance has already heated up and then the appliance door opened, leave the door ajar for several minutes and then close. In order to resume the programme, set the main switch to ON again.
Maintenance and care
You can help prevent faults by checking and maintaining your appliance regularly. Therefore you should occasionally examine the inside of your dishwasher.
Overall condition of the appliance
Check the rinsing compartment for grease and limescale deposits. If you find any deposits: Fill the detergent dispenser with detergent. Start the empty appliance with the programme which has the highest rinsing temperature. [. . . ] Please contribute to a better environment by disposing of packaging materials in an environmentally-friendly manner. All plastic parts of the appliance are identified by internationally standardised symbols (e. g. When the appliance is being disposed of, the plastic waste can be sorted for environmentally-friendly recycling. Please ask your dealer or inquire at your local authority about current means of disposal. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LYNX 4VN170BA
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LYNX 4VN170BA will begin.