User manual MACKIE DS3232
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MACKIE DS3232. We hope that this MACKIE DS3232 user guide will be useful to you.
Manual abstract: user guide MACKIE DS3232
Detailed instructions for use are in the User's Guide.
[. . . ] U-NET
POWER
COMM
DS3232
24-BIT / 96kHz DIGITAL SNAKE
1
PUSH PUSH
2
PUSH
3
PUSH
4
PUSH
5
PUSH
6
PUSH
17
PUSH PUSH
18
PUSH
19
PUSH
20
PUSH
21
PUSH
22
PUSH
23
PUSH
1
2
3
4
5
6
17
18
19
20
21
22
23
PUSH
7
PUSH
INPUTS 8
PUSH
9
PUSH
10
PUSH
11
PUSH
12
PUSH
13
PUSH
14
PUSH
15
PUSH
16
24
PUSH
25
PUSH
26
PUSH
27
PUSH
28
PUSH
29
PUSH
30
PUSH
31
PUSH
32
7
RETURNS 8
9
10
11
12
13
14
15
16
24
25
26
27
28
29
30
31
32
DS3232 DIGITAL SNAKE
Important Safety Instructions
1. Donotblockanyventilationopenings. Installinaccordancewiththe manufacturer'sinstructions. Donotinstallnearanyheatsourcessuchasradiators, heatregisters, stoves, orotherapparatus(includingamplifiers)thatproduceheat. Donotdefeatthesafetypurposeofthepolarizedorgrounding-type plug. Apolarizedplughastwobladeswithonewiderthantheother. [. . . ] The XLR outputs are wired as follows: Pin 1 = Shield or ground Pin 2 = Positive (+ or hot) Pin 3 = Negative ( or cold) Like the inputs, the routing for the 32 returns on the DS3232 is configured by the mixing console. Generally, this will be done in the Setup window for the expansion cards where the U100 Network card is installed. In the case of the TT24, there is no configuration required for the returns.
. Connect the detachable linecord (included in the box with your DS3232) to the power receptacle, and plug the other end of the linecord into an AC outlet. The DS3232 has a universal power supply that can accept any AC voltage ranging from 100 VAC to 240 VAC. This also means that it is less susceptible to voltage sags or spikes, providing greater electromagnetic isolation and better protection against AC line noise.
. Fan
The DS3232 is fan-cooled and brings air in through the sides and out through the rear. Make sure that cool air is available at the sides of the unit, and that there is room at the rear for the warm air to exit from the enclosure and dissipate. If rack-mounted, make sure the DS3232 is not pulling warm (or hot) air in from the rack, and that the sides and rear are not obstructed.
Rear Panel
All the connection points (other than the power cord) are located on the front panel for easy accessibility when rack mounted.
. When the POWER switch is turned ON, power is supplied to the DS3232 and the POWER LED on the front panel lights up.
DS3232
24-BIT / 96kHz DIGITAL SNAKE
R
LISTED COMMERCIAL AUDIO EQUIPMENT 65HJ
DESIGNED BY MACKOIDS IN WOODINVILLE, WA, USA · MANUFACTURED IN CHINA FABRIQUE EN CHINE COPYRIGHT ©2006 · "MACKIE", AND THE RUNNING MAN FIGURE ARE TRADEMARKS OF LOUD TECHNOLOGIES, INC. · PATENT PENDING.
WARNING:
RISK OF ELECTRIC SHOCK DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE -- NE PAS OUVRIR
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. REFER SERVICING TO QUALIFIED PERSONNEL.
SERIAL NUMBER
MANUFACTURING DATE
AND RATING. DISCONNECT SUPPLY CORD BEFORE
~90-265VAC 50-60Hz 85W FUSE: 5A FB
POWER
DS33 DIGITAL SNAKE
Appendix A: Service Information
Warranty Service
Details concerning Warranty Service are spelled out in the Warranty section on page 15. If you think your DS3232 has a problem, please check out the following troubleshooting tips and do your best to confirm the problem. Visit the Support section of our website (www. mackie. com/support) where you will find lots of useful information such as FAQs, documentation, and user forums. You may find the answer to the problem without having to send your Digital Snake away. These may sound obvious to you, but here are some things you can check. · Try putting the U100 card in another slot (be sure to turn everything off before removing and replacing the card). Is the fan running and unobstructed so it can circulate air through the DS3232?If the DS3232 feels hot to the touch, power off the unit for a few minutes to allow it to cool. Turn the unit back on and, if communication is restored, provide better ventilation so cool air is available to the DS3232. Is the mixing console properly configured to accept the input signals from the DS3232? [. . . ] Ship the product in its original shipping carton, freight prepaid to the authorized service center. The address of your closest authorized service center will be given to you by Technical Support along with a Service Request Number. IMPORTANT: Make sure that the Service Request Number is plainly written on the shipping carton. LOUD Technologies reserves the right to inspect any products that may be the subject of any warranty claims before repair or replacement is carried out. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MACKIE DS3232
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MACKIE DS3232 will begin.