User manual MAKITA 3708F

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA 3708F. We hope that this MAKITA 3708F user guide will be useful to you.


MAKITA 3708F : Download the complete user guide (554 Ko)

You may also download the following manuals related to this product:

   MAKITA 3708F (805 ko)
   MAKITA 3708F (805 ko)
   MAKITA 3708F (805 ko)
   MAKITA 3708F (805 ko)
   MAKITA 3708F (805 ko)
   MAKITA 3708F (805 ko)
   MAKITA 3708F (805 ko)
   MAKITA 3708F (805 ko)
   MAKITA 3708F (805 ko)
   MAKITA 3708F (965 ko)
   MAKITA 3708F (737 ko)
   MAKITA 3708F (737 ko)
   MAKITA 3708F (737 ko)
   MAKITA 3708F ANNEXE 67 (805 ko)
   MAKITA 3708F ANNEXE 559 (805 ko)
   MAKITA 3708F ANNEXE 603 (282 ko)
   MAKITA 3708F ANNEXE 377 (805 ko)
   MAKITA 3708F ANNEXE 863 (282 ko)

Manual abstract: user guide MAKITA 3708F

Detailed instructions for use are in the User's Guide.

[. . . ] Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. Double insulated tools are equipped with a polarized plug (one blade is wider than the other. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system. [. . . ] Watch for vibration or wobbling that could indicate improperly installed bit. Always switch off and wait for the bit to come to a complete stop before removing the tool from workpiece. Do not touch the bit immediately after operation; it may be extremely hot and could burn your skin. Always lead the power supply cord away from the tool towards the rear. Do not smear the tool base carelessly with thinner, gasoline, oil or the like. Draw attention to the need to use cutters of the correct shank diameter and which are suitable for the speed of the tool. To adjust the bit protrusion, loosen the lever and move the tool base up or down as desired by turning the adjusting roller. WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. CAUTION: With the tool unplugged and switch in the "OFF" position, rotate the collet nut on the tool several times to be sure that the bit turns freely and does not contact the base or trimmer shoe in any way. CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. CAUTION: Before plugging in the tool, always be sure that the tool is switched off. â· Switch can be locked in "ON" position for ease of operator comfort during extended use. CAUTION: Do not tighten the collet nut without inserting a bit, or the collet cone will break. Insert the bit all the way into the collet cone and tighten the collet nut securely with the two wrenches. For model 3708FC only The tool equipped with electronic function are easy to operate because of the following features. Constant speed control Electronic speed control for obtaining constant speed. Possible to get fine finish, because the rotating speed is kept constant even under load condition. Soft start Soft-start feature minimizes start-up shock, and makes the tool start smoothly. For model 3708F/3708FC only CAUTION: Do not look in the light or see the source of light directly. Be careful not to scratch the lens of lamp, or it may lower the illumination. Use the bolts, wing nuts, spring washers and flat washers to install the trimmer shoe as shown in the figure. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. [. . . ] CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Trimming, curved cuts in veneers for furniture and the like can be done easily with the trimmer guide. Loosen the clamp screw (B) and adjust the distance between the bit and the trimmer guide by turning the adjusting screw (1 mm (3/64") per turn). At the desired distance, tighten the clamp screw (B) to secure the trimmer guide in place. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 3708F




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 3708F will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.