User manual MAKITA 6904VH

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA 6904VH. We hope that this MAKITA 6904VH user guide will be useful to you.


MAKITA 6904VH : Download the complete user guide (225 Ko)

You may also download the following manuals related to this product:

   MAKITA 6904VH (421 ko)
   MAKITA 6904VH (662 ko)
   MAKITA 6904VH (662 ko)
   MAKITA 6904VH (662 ko)
   MAKITA 6904VH (662 ko)
   MAKITA 6904VH (662 ko)
   MAKITA 6904VH (662 ko)
   MAKITA 6904VH (662 ko)
   MAKITA 6904VH (662 ko)
   MAKITA 6904VH (662 ko)
   MAKITA 6904VH (450 ko)
   MAKITA 6904VH (450 ko)
   MAKITA 6904VH (450 ko)
   MAKITA 6904VH ANNEXE 19 (443 ko)
   MAKITA 6904VH ANNEXE 399 (662 ko)
   MAKITA 6904VH ANNEXE 439 (662 ko)
   MAKITA 6904VH ANNEXE 806 (443 ko)
   MAKITA 6904VH ANNEXE 302 (443 ko)
   MAKITA 6904VH ANNEXE 630 (443 ko)
   MAKITA 6904VH ANNEXE 671 (443 ko)
   MAKITA 6904VH ANNEXE 501 (443 ko)
   MAKITA 6904VH ANNEXE 898 (443 ko)
   MAKITA 6904VH ANNEXE 465 (443 ko)
   MAKITA 6904VH ANNEXE 778 (443 ko)
   MAKITA 6904VH ANNEXE 129 (443 ko)
   MAKITA 6904VH ANNEXE 282 (443 ko)
   MAKITA 6904VH PARTS LIST (96 ko)
   MAKITA 6904VH ANNEXE 731 (662 ko)
   MAKITA 6904VH ANNEXE 214 (443 ko)

Manual abstract: user guide MAKITA 6904VH

Detailed instructions for use are in the User's Guide.

[. . . ] The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. [. . . ] DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to recipro saw safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Check the socket carefully for wear, cracks or damage before installation. The proper fastening torque may differ depending upon the kind or size of the bolt. WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. Number of blow CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To change the speed, first switch off the tool and then slide the speed change lever fully to the "H" side (lower side) for high speed or to the "L" side (upper side) for low speed. Before starting operation, ensure that the speed Select the speed optimum for your job. The proper fastening torque may differ depending upon the kind or size of the bolt, the material of the workpiece to be fastened, etc. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. M16X50 (5/8" X 2") at low speed M12X50 (1/2" X 2") at high speed M12 (1/2") M12X50 (1/2" X 2") at low speed M10X50 (3/8" X 2") at low speed M10X50 (3/8" X 2") at high speed Always use the correct size socket for bolts and nuts. To install the socket, push it onto the anvil of the tool until it locks into place. M16X50 (5/8" X 2") at low speed M12 (1/2") M12X50 (1/2" X 2") at low speed M10 (3/8") M10X50 (3/8" X 2") at low speed M10X50 (3/8" X 2") at high speed Turn the tool on and fasten for the proper fastening time. Before starting your job, always perform a test operation to determine the proper fastening time for your bolt or nut. the fastening torque is affected by a wide variety of factors including the following. Failure to use the correct size socket will cause a reduction in the fastening torque. Even though the torque coefficient and the class of bolt are the same, the proper fastening torque will differ according to the diameter of bolt. [. . . ] Should any trouble develop during this one year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This Warranty does not apply where: · repairs have been made or attempted by others: · Repairs are required because of normal wear and tear: · This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 6904VH




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 6904VH will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.