User manual MAKITA 9526NB

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA 9526NB. We hope that this MAKITA 9526NB user guide will be useful to you.


MAKITA 9526NB : Download the complete user guide (197 Ko)

You may also download the following manuals related to this product:

   MAKITA 9526NB (453 ko)
   MAKITA 9526NB (453 ko)
   MAKITA 9526NB (453 ko)
   MAKITA 9526NB (453 ko)

Manual abstract: user guide MAKITA 9526NB

Detailed instructions for use are in the User's Guide.

[. . . ] They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire. Safety hints For your own safety, please refer to the enclosed safety instructions. Other personal protective equipment such as dust mask, gloves, helmet and apron should be worn when necessary. [. . . ] Pay attention that the wheel continues to rotate after the tool is switched off. Do not touch the workpiece immediately after operation; it may be extremely hot and could burn your skin. Position the tool so that the power cord always stays behind the tool during operation. If working place is extremely hot and humid, or badly polluted by conductive dust, use a short-circuit breaker (30 mA) to assure operator safety. Ensure that ventilation openings are kept clear when working in dusty conditions. If it should become necessary to clear dust, first disconnect the tool from the mains supply (use non metallic objects) and avoid damaging internal parts. Mount the wheel guard with the tab on the wheel guard band aligned with the notch on the bearing box. Then rotate the wheel guard 180° clockwise (for 9526NB) or counterclockwise (for 9527NB and 9528NB). The side grip can be installed on either side of the tool, whichever is convenient. Continued use of a worn-out wheel may result in wheel explosion and serious personal injury. Depressed center wheel should not be used after it has been worn down to 75 mm in diameter for Model 9526NB or 90 mm for Models 9527NB and 9528NB in diameter. Use of the wheel after this point is unsafe and it should be removed from service and rendered unusable by intentional destruction. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. CAUTION: Always be sure that the tool is switched off and unplugged before installing or removing the wheel. Fit the wheel on over the inner flange and screw the lock nut onto the spindle. 4) To tighten the lock nut, press the shaft lock firmly so that the spindle cannot revolve, then use the lock nut wrench and securely tighten clockwise. [. . . ] The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. C is in compliance with the following standards or standardized documents, HD400, EN50144, EN55014, EN61000 in accordance with Council Directives, 73/23/EEC, 89/336/EEC and 98/37/EC. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 9526NB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 9526NB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.