User manual MAKITA 9556NB

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA 9556NB. We hope that this MAKITA 9556NB user guide will be useful to you.


MAKITA 9556NB : Download the complete user guide (184 Ko)

You may also download the following manuals related to this product:

   MAKITA 9556NB (763 ko)
   MAKITA 9556NB (763 ko)
   MAKITA 9556NB (763 ko)
   MAKITA 9556NB (763 ko)
   MAKITA 9556NB (452 ko)
   MAKITA 9556NB (452 ko)
   MAKITA 9556NB (452 ko)
   MAKITA 9556NB (452 ko)
   MAKITA 9556NB (452 ko)
   MAKITA 9556NB (452 ko)
   MAKITA 9556NB (452 ko)
   MAKITA 9556NB (452 ko)
   MAKITA 9556NB (452 ko)
   MAKITA 9556NB (452 ko)
   MAKITA 9556NB ANNEXE 446 (452 ko)
   MAKITA 9556NB ANNEXE 431 (452 ko)

Manual abstract: user guide MAKITA 9556NB

Detailed instructions for use are in the User's Guide.

[. . . ] Intended use The tool is intended for cutting, grinding and sanding of metal and stone materials without the use of water. Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire. [. . . ] Make sure the wheel is not contacting the workpiece before the switch is turned on. Hold the tool so that sparks fly away from you and other persons or flammable materials. Pay attention that the wheel continues to rotate after the tool is switched off. Do not touch the workpiece immediately after operation; it may be extremely hot and could burn your skin. Position the tool so that the power cord always stays behind the tool during operation. If working place is extremely hot and humid, or badly polluted by conductive dust, use a shortcircuit breaker (30 mA) to assure operator safety. Ensure that ventilation openings are kept clear when working in dusty conditions. If it should become necessary to clear dust, first disconnect the tool from the mains supply (use non metallic objects) and avoid damaging internal parts. When use cut-off wheel, always work with the dust collecting wheel guard required by domestic regulation. Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Such blades when used on a grinder frequently kick and cause loss of control leading to personal injury. cAUTION: · After operation, always switch off the tool and wait until the wheel has come to a complete stop before putting the tool down. Press the shaft lock to prevent spindle rotation when installing or removing accessories. Before plugging in the tool, always check to see that the slide switch actuates properly and returns to the "OFF" position when the rear of the slide switch is depressed. to start the tool , slide the slide switch toward the "I (ON)" position. For continuous operation, press the front of the slide switch to lock it. ALWAYS hold the tool firmly with one hand on housing and the other on the side handle. In general, keep the edge of the wheel or disc at an angle of about 15 degrees to the workpiece surface. [. . . ] 6) To tighten the lock nut, press the shaft lock firmly so that the spindle cannot revolve, then use the lock nut wrench and securely tighten clockwise. These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA 9556NB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA 9556NB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.