User manual MAKITA AT3623

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA AT3623. We hope that this MAKITA AT3623 user guide will be useful to you.


MAKITA AT3623 : Download the complete user guide (2789 Ko)

Manual abstract: user guide MAKITA AT3623

Detailed instructions for use are in the User's Guide.

[. . . ] Knob Handle clamp Handle holder Compression spring Barrier Spacer Cutter blade Guard Nylon cutting head Guard extension Bolt Wing Two bolts Protector cover Hex wrench Receive washer Clamp washer Cup 35. Hex nut Threaded spindle Lever Buckle Hanger Grease hole Gear case Cover Latches Press Spool For left hand rotation Notches Eyelets Protrusion (Not shown) Slot of the eyelet SPECIFICATIONS Model Type of handle No load speed Overall length Cutting blade diameter Cutting diameter with nylon cutting head Net weight Rated voltage Standard battery cartridge(s) Warning: Use only the battery cartridge(s) described. 9 kg • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. € Specifications and battery cartridge may differ from country to country. [. . . ] 13) Status Blinking Lighting On Battery power has been nearly used up. Battery protector is shutting off the power - battery power has been used up. Electric or electronic malfunction Action to be taken Replace the battery with fully charged one. Release the switch trigger and remove the cause of the motor lock or overload. If the cutting tool is locked by entangling weeds or the like, always remove the battery cartridge before clearing it. Bump feeding at a high RPM may cause damage to the nylon cutting head. € The bump feed will not operate properly if the head is not rotating. 14) The nylon cutting head is a dual string trimmer head provided with a bump & feed mechanism. To cause the nylon cord to feed out, the cutting head should be bumped against the ground while rotating at a low RPM. As the nylon cord is feeding out it will automatically be cut to the proper length by the cutters on the guard extension. NOTE: If the nylon cord does not feed out while bumping the head, rewind/replace the nylon cord by following the procedures described under “Maintenance. € Battery remaining capacity indicator (only for models with Battery AP-3622) Battery AP-3622 is equipped with the battery remaining capacity indicator. 15) Press the CHECK button to indicate the battery remaining capacity. Then tighten four screws so that the grip/barrier assembly cannot move or rotate on the shaft pipe. Setting the grip/barrier assembly close to the other grip beyond the length of the spacer may cause loss of control and serious personal injury. 19 & 20) WARNING: • Never use the tool without the guard illustrated in place. CAUTION: • While installing the guard extension be careful not to contact the sharp nylon cord cutter provided on the guard extension. Slightly push the wings outward and put the bolts into the holes in the wings. Place the guard extension onto the mounting track provided on the lower edge of the guard. And slide it into position until the guard extension clicks and locks into place. The guard extension is designed so that it will only mount onto the guard in one direction. 23) NOTE: • Remove tape adhered to cutter, which cuts nylon cord, on guard extension at the first use. [. . . ] 37) Supply grease (Shell Alvania 2 or equivalent) to the gear case through the grease hole every 30 hours. ) TROUBLE SHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Dolmar Authorized Service Centers, always using Dolmar replacement parts for repairs. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA AT3623




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA AT3623 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.