User manual MAKITA BMR102

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA BMR102. We hope that this MAKITA BMR102 user guide will be useful to you.


MAKITA BMR102 : Download the complete user guide (1564 Ko)

Manual abstract: user guide MAKITA BMR102

Detailed instructions for use are in the User's Guide.

[. . . ] Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. Under abusive conditions, liquid may be ejected from the battery; avoid contact. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. [. . . ] Reduced power, distortion and a “stuttering sound” or low battery sign that appears on the display are all the signs that the main battery pack needs to replace. Note: The battery pack can’t be charged via the supplied AC power adaptor. When low battery sign appears and an “E” keeps on flashing is the time to replace the back up batteries. Operating the radio This radio equips with three tuning methods - Scan tuning, Manual tuning and Memory presets recall. Make sure the rubber bended rod antenna has been well placed for best FM reception. Try to avoid to operate the radio next to computer screen and other equipment which will cause interference to the radio. Press and release Scan button (long press Scan button more than 2 seconds will activate time setting), LCD display will flash Scan symbol and the radio will search and stop automatically when it finds a radio station. Note: A stereo symbol will appear on the display, if the station found is a stereo station. Note: The radio will continue to search next available stations if you do not press Scan button again when it finds a radio station. 10 & 11) Install the Soft bended rod antenna as shown in the figure. Note: There is a click in the battery compartment designed to store the removed antenna. 12) Remove the rubber protector and insert the adaptor plug into the DC socket on the front side of the radio. Whenever the adaptor is used, the battery pack is automatically disconnected. The AC adaptor should be disconnected from the main supply when not in use. Note: When your radio has any interference in AM band by its adaptor, please move your radio away from its AC adaptor over 30 cm. A single rotary to the Tuning/Volume control knob will change the frequency in the following increment: FM: 50 or 100 kHz AM (MW): 9 or 10 kHz Note: If the radio is in volume control status, press in the tuning/volume control to become Tuning status. Keep on rotating the Tuning/Volume control knob until the required frequency shown on the display. Display will show “-: - -” when the back up batteries are installed. [. . . ] The snooze function can be repeatedly during one hour that the alarms are active. Sleep function The sleep timer will automatically switched off the radio after a preset time has elapsed. Release the Power button when the required sleep time appears in the display. The symbol will appear in the display and the radio will play the last station selected. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA BMR102




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA BMR102 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.