User manual MAKITA BO5020

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA BO5020. We hope that this MAKITA BO5020 user guide will be useful to you.


MAKITA BO5020 : Download the complete user guide (361 Ko)

You may also download the following manuals related to this product:

   MAKITA BO5020 (442 ko)
   MAKITA BO5020 (442 ko)
   MAKITA BO5020 (442 ko)
   MAKITA BO5020 (442 ko)
   MAKITA BO5020 (2068 ko)
   MAKITA BO5020 (2068 ko)
   MAKITA BO5020 (2068 ko)
   MAKITA BO5020 (2068 ko)
   MAKITA BO5020 (2068 ko)
   MAKITA BO5020 (2068 ko)
   MAKITA BO5020 (2068 ko)
   MAKITA BO5020 (2068 ko)
   MAKITA BO5020 (2068 ko)
   MAKITA BO5020 ANNEXE 167 (2068 ko)
   MAKITA BO5020 ANNEXE 384 (2068 ko)
   MAKITA BO5020 ANNEXE 305 (194 ko)
   MAKITA BO5020 PARTS (125 ko)
   MAKITA BO5020 9016B (176 ko)
   MAKITA BO5020 PARTS LIST (125 ko)
   MAKITA BO5020 ANNEXE 338 (2068 ko)
   MAKITA BO5020 ANNEXE 406 (194 ko)

Manual abstract: user guide MAKITA BO5020

Detailed instructions for use are in the User's Guide.

[. . . ] A moment of inattention while operating power tools may result in serious personal injury. Double insulated tools are equipped with a polarized plug (one blade is wider than the other. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. [. . . ] Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to sander safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. This tool has not been waterproofed, so do not use water on the workpiece surface. Ventilate your work area adequately when you perform sanding operations. Use of this tool to sand some products, paints and wood could expose user to dust containing hazardous substances. WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. To stop the tool from the locked position, pull the switch trigger fully, then release it. Orbits per minute The tool speed can be infinitely adjusted between 4, 000 and 12, 000 orbit per minute by turning the adjusting dial. Higher speed is obtained when the dial is turned in the direction of number 5; lower speed is obtained when it is turned in the direction of number 1. Refer to the figure for the relationship between the number settings on the adjusting dial and the kind of work. CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. A range: For polishing B range: For finish sanding C range: For regular sanding CAUTION: If the tool is operated continuously at low speeds for a long time, the motor will get overloaded and heated up. The speed adjusting dial can be turned only as far as 5 and back to 1. Do not force it past 5 or 1, or the speed adjusting function may no longer work. Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. ⷠSwitch can be locked in "ON" position for ease of operator comfort during extended use. For continuous operation, pull the switch trigger and then push in the lock button. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Hold the tool and remove the dust bag from the dust nozzle while pressing the push button. [. . . ] Should any trouble develop during this one year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This Warranty does not apply where: · repairs have been made or attempted by others: · Repairs are required because of normal wear and tear: · This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA BO5020




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA BO5020 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.