User manual MAKITA BPT351

[. . . ] Stop driving operations immediately if you notice something wrong or out of the ordinary with the tool. general Power Tool Safety Warnings GEA010-1 WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Careless handling of the nailer can result in unexpected firing of fasteners and personal injury. [. . . ] Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. Safety system WARNING: • Make sure all safety systems are in working order before operation. 2) Test safety systems for possible faulty operation before pin-nailing as follows. The tool accidentally operates if only the trigger is pulled although the lever is not pulled. The tool does not operate when the trigger is pulled with the lever pulled. Trigger and lever CAUTION: • Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. 4) The tool is provided with lever as a safety system in addition to the usual trigger. 5 To fire pin-nails, first pull the lever and then pull the trigger. Adjusting the depth of pin-nailing WARNING: • Always make sure that your fingers are not placed on the trigger or the lever and the battery cartridge is removed before loading the pin nailer. Turn two bolts a quarter turn using the hex wrench provided with the tool and the driver guide cover will slide up or down. Loading in wrong direction may cause premature wear and tear of the driver and damage of the other parts. Place pin nails against the magazine and insert into the slit all the way. ) Keeping pin nails in this position, insert these nails all the way into the driver guide. Return the magazine to the original position and lock it with the locking lever. Using pin nails other than those specified may cause pin nail jamming and breakage of the pin nailer. Lighting up the lamps CAUTION: • Do not look in the light or see the source of light directly. NOTE: • Use a dry cloth to wipe the dirt off the lens of lamp. [. . . ] NOTE: • When the trigger is pulled after a quick trigger action, the nailer may do nothing but operates momentarily and may not fire pin nails. At this time, release the trigger once, pull it again and the pin nails can be fired. €¢ Using the pin nailer continuously with the head of fired pin nails remaining above the surface of material to be fastened may cause damage to the driver of the pin nailer and nailer jamming etc. OPTIONAL ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. [. . . ]