User manual MAKITA BUC122

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA BUC122. We hope that this MAKITA BUC122 user guide will be useful to you.


MAKITA BUC122 : Download the complete user guide (1323 Ko)

You may also download the following manuals related to this product:

   MAKITA BUC122 (296 ko)
   MAKITA BUC122 (296 ko)
   MAKITA BUC122 (296 ko)
   MAKITA BUC122 (2723 ko)
   MAKITA BUC122 (2723 ko)
   MAKITA BUC122 (2723 ko)
   MAKITA BUC122 (2723 ko)
   MAKITA BUC122 (2723 ko)
   MAKITA BUC122 (2723 ko)
   MAKITA BUC122 ANNEXE 38 (296 ko)
   MAKITA BUC122 ANNEXE 22 (296 ko)
   MAKITA BUC122 PARTS LIST (129 ko)
   MAKITA BUC122 ANNEXE 82 (1343 ko)
   MAKITA BUC122 ANNEXE 430 (296 ko)
   MAKITA BUC122 ANNEXE 357 (296 ko)
   MAKITA BUC122 ANNEXE 891 (296 ko)
   MAKITA BUC122 ANNEXE 787 (296 ko)
   MAKITA BUC122 ANNEXE 251 (296 ko)
   MAKITA BUC122 ANNEXE 298 (296 ko)
   MAKITA BUC122 ANNEXE 697 (2723 ko)
   MAKITA BUC122 ANNEXE 955 (1343 ko)
   MAKITA BUC122 ANNEXE 475 (1343 ko)
   MAKITA BUC122 ANNEXE 168 (1343 ko)
   MAKITA BUC122 ANNEXE 606 (1343 ko)
   MAKITA BUC122 ANNEXE 360 (1343 ko)
   MAKITA BUC122 ANNEXE 418 (1343 ko)
   MAKITA BUC122 ANNEXE 205 (1343 ko)
   MAKITA BUC122 ANNEXE 156 (296 ko)
   MAKITA BUC122 ANNEXE 913 (2723 ko)
   MAKITA BUC122 ANNEXE 391 (1343 ko)

Manual abstract: user guide MAKITA BUC122

Detailed instructions for use are in the User's Guide.

[. . . ] A moment of inattention while operating chain saws may cause entanglement of your clothing or body with the saw chain. Always hold the chain saw with your right hand on the rear handle and your left hand on the front handle. Holding the chain saw with a reversed hand configuration increases the risk of personal injury and should never be done. Hold the power tool by insulated gripping surfaces only, because the saw chain may contact hidden wiring. [. . . ] If the cartridge does not slide in easily, it is not being inserted correctly. Just a slight loosening of the screw allows the saw chain tension to be adjusted. cAUTION: · For a while after a new saw chain is installed, it tends to become loosened. Installing or removing saw chain should be carried out in a clean place free from sawdust and the like. Check the amount of remaining oil in the oil tank through the oil inspection window. After refilling the tank, always screw the provided oil tank cap on the chain saw. cAUTION: · When filling the chain saw with chain oil for the first time, or refilling the tank after it has been completely emptied, add oil up to the bottom edge of the filler neck. As a saw chain oil, use oil exclusively for Makita chain saws or oil available in market. Before cutting out, make sure that the provided oil tank cap is screwed in place. Bring the tip guide/lower guide into contact with the branch to be cut before switching on. Cutting withoutbringing the tip guide/lower guide into contact with the branch may cause the guide bar to wobble, resulting in injury to operator. Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the saw chain. Use only saw chain and guide bar with bar tip designed for this chain saw (see the Extract from the spare parts list). In order to prevent kickback, do not remove the bar tip or replace the guide bar with one without a bar tip. Loosen the screw by turning counterclockwise the knob until the sprocket cover comes off. At this time, fit the saw chain as shown in the figure because it rotates in the direction of arrow. 4) Place the saw chain so that the spring and boss are positioned inside it and fit in the other end of saw chain around the sprocket as shown in the figure. 6) Insert the hook of sprocket cover into the hole in the tool and then place the sprocket cover on the tool. Keep all parts of the body away from the saw chain when the motor is operating. [. . . ] The declared vibration emission value may also be used in a preliminary assessment of exposure. wARNING: · The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used. Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). Noise The typical A-weighted noise level determined according to EN60745: Sound pressure level (LpA): 84. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA BUC122




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA BUC122 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.