User manual MAKITA DA4030

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA DA4030. We hope that this MAKITA DA4030 user guide will be useful to you.


MAKITA DA4030 : Download the complete user guide (534 Ko)

You may also download the following manuals related to this product:

   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 (1317 ko)
   MAKITA DA4030 ANNEXE 258 (1317 ko)
   MAKITA DA4030 ANNEXE 579 (1317 ko)
   MAKITA DA4030 ANNEXE 852 (177 ko)
   MAKITA DA4030 ANNEXE 258 (157 ko)
   MAKITA DA4030 ANNEXE 450 (1317 ko)
   MAKITA DA4030 ANNEXE 733 (177 ko)

Manual abstract: user guide MAKITA DA4030

Detailed instructions for use are in the User's Guide.

[. . . ] When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W". These cords are rated for outdoor use and reduce the risk of electric shock. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. [. . . ] Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin. CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. To change the speed, depress the lock button and turn the speed change knob so that the pointer points to the position 1 for low speed or the position 2 for high speed. CAUTION: Use the speed change knob only after the tool comes to a complete stop. If you operate the tool with the speed change knob positioned halfway between the position 1 and the position 2, the tool may be damaged. The side grip can be installed on either side of the tool, whichever is convenient. The spade grip can be installed in any position as shown in the figure. To change the position, loosen the hex bolts (both sides) with a hex wrench and turn the spade grip to the desired position. After reposition the grip, return the hex wrench to the wrench holder. For Model DA4031 only The torque limiter will actuate when a certain torque level is reached (for lower speed setting: position 1). The switch handle can be rotated to either 90° left or right to fit your work needs. Press the lock button and rotate the switch handle until the mark on the lock button is aligned with that on the motor housing. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. CAUTION: Always be sure that the side grip is installed securely before operation. CAUTION: Always be sure that the hex bolts (both sides) of the spade grip are tightened securely. To remove the bit, turn the chuck key counterclockwise in just one hole, then loosen the chuck by hand. [. . . ] Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. These accessories or attachments are recommended for use with your Makita tool specified in this manual. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA DA4030




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA DA4030 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.