User manual MAKITA DC18SC

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA DC18SC. We hope that this MAKITA DC18SC user guide will be useful to you.


MAKITA DC18SC : Download the complete user guide (652 Ko)

You may also download the following manuals related to this product:

   MAKITA DC18SC (105 ko)
   MAKITA DC18SC (105 ko)
   MAKITA DC18SC (105 ko)
   MAKITA DC18SC (105 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)
   MAKITA DC18SC DC24WA (479 ko)

Manual abstract: user guide MAKITA DC18SC

Detailed instructions for use are in the User's Guide.

[. . . ] CAUTION ­ To reduce risk of injury, charge only MAKITA rechargeable batteries. Other types of batteries may burst causing personal injury and damage. Non-rechargeable batteries cannot be charged with this battery charger. [. . . ] Do not attempt to use a step-up transformer, an engine generator or DC power receptacle. Insert the battery cartridge into charger until it stops adjusting to the guide of charger. Terminal cover of charger can be opened with inserting and closed with pulling out the battery cartridge. When the battery cartridge is inserted, the charging light color will change from green to red and charging will begin. The charging light will keep lighting up lit steadily during charging. One red charging light indicates charged condition in 0 ­ 80% and two red ones indicates 80 ­ 100%. With finish of charge, the charging lights will change from two red ones to two green ones. If you leave the battery cartridge in the charger after the charging cycle is complete, the charger will switch into its "trickle charge (maintenance charge)" mode which will last approximately 24 hours. Never use it for other purposes or for other manufacturer's batteries. When you charge a battery cartridge which is new or has not been used for a long period of time, it may not accept a full charge until after discharging it completely and recharging a couple of times. If you charge a battery cartridge from a just-operated tool or battery cartridge which has been left in a location exposed to direct sunlight for a long time, the charging light may flash in red color. charging will begin after the battery cartridge is cooled by the cooling fan installed in the charger (DC14SC , DC18SC and DC24SC only). 70°C, two charging lights may flash in red color, and when approx. If the charging light flashes alternately in green and red color, charging is not possible. [. . . ] The battery employed in the following conditions repeatedly requires "conditioning charge" to prevent fast wear out. If you leave the battery cartridge in the charger to prevent spontaneous discharging after full charge, the charger will switch into its "trickle charge (maintenance charge)" mode and keep the battery cartridge fresh and fully charged. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by a Makita Authorized Service Centers, always using Makita replacement parts. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA DC18SC




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA DC18SC will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.