User manual MAKITA DF331DWAE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA DF331DWAE. We hope that this MAKITA DF331DWAE user guide will be useful to you.


MAKITA DF331DWAE : Download the complete user guide (13396 Ko)

Manual abstract: user guide MAKITA DF331DWAE

Detailed instructions for use are in the User's Guide.

[. . . ] Vibration The vibration total value (tri-axial vector sum) determined according to EN60745: Model DF331D Work mode: drilling into metal 2 Vibration emission (ah, D) : 2. 5 m/s2 EC Declaration of Conformity For European countries only Makita declares that the following Machine(s): Designation of Machine: Cordless Driver Drill Model No. / Type: DF331D, DF031D Conforms to the following European Directives: 2006/42/EC They are manufactured in accordance with the following standard or standardized documents: EN60745 The technical file in accordance with 2006/42/EC is available from: Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium 25. 2015 Yasushi Fukaya Director Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium ENGLISH 5 General power tool safety warnings WARNING: Read all safety warnings and all instructions. [. . . ] This system automatically cuts off power to the motor to extend battery life. The tool will automatically stop during operation if the tool and/or battery are placed under one of the following conditions: Overloaded: The tool is operated in a manner that causes it to draw an abnormally high current. In this situation, release the switch trigger on the tool and stop the application that caused the tool to become overloaded. In this situation, let the battery cool before pulling the switch trigger again. Low battery voltage: The remaining battery capacity is too low and the tool will not operate. CAUTION: Do not look in the light or see the source of light directly. The lamp goes out approximately 10 seconds after releasing the switch trigger. Be careful not to scratch the lens of lamp, or it may lower the illumination.  Reversing switch lever] CAUTION: Always check the direction of rotation before operation. CAUTION: Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. CAUTION: When not operating the tool, always set the reversing switch lever to the neutral position. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. Indicating the remaining battery capacity Only for battery cartridges with "B" at the end of the model number [Fig.  Check button] Press the check button on the battery cartridge to indicate the remaining battery capacity.  Speed change lever] Lighted CAUTION: Always set the speed change lever fully to the correct position. If you operate the tool with the speed change lever positioned halfway between the "1" side and "2" side, the tool may be damaged. NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. ENGLISH 7 Position of speed change lever 1 2 Speed Torque Applicable operation Heavy loading operation Light loading operation Low High High Low To change the speed, switch off the tool first. Select the "2" side for high speed or "1" for low speed but high torque. Be sure that the speed change lever is set to the correct position before operation. [. . . ] Be sure to close the holster securely with the holster button so that it holds the tool firmly. NOTE: Some items in the list may be included in the tool package as standard accessories. MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA DF331DWAE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA DF331DWAE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.