User manual MAKITA DPC6411

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA DPC6411. We hope that this MAKITA DPC6411 user guide will be useful to you.


MAKITA DPC6411 : Download the complete user guide (4038 Ko)

You may also download the following manuals related to this product:

   MAKITA DPC6411 (1773 ko)
   MAKITA DPC6411 (4724 ko)
   MAKITA DPC6411 (1780 ko)
   MAKITA DPC6411 (4724 ko)
   MAKITA DPC6411 (4724 ko)
   MAKITA DPC6411 (4724 ko)
   MAKITA DPC6411 (4724 ko)
   MAKITA DPC6411 (4724 ko)
   MAKITA DPC6411 (1773 ko)
   MAKITA DPC6411 (4724 ko)
   MAKITA DPC6411 (4724 ko)
   MAKITA DPC6411 (4724 ko)
   MAKITA DPC6411 (1751 ko)
   MAKITA DPC6411 PARTS LIST (1590 ko)
   MAKITA DPC6411 PARTS LIST (1590 ko)
   MAKITA DPC6411 PARTS LIST (1590 ko)
   MAKITA DPC6411 ANNEXE 946 (4034 ko)
   MAKITA DPC6411 ANNEXE 188 (4034 ko)
   MAKITA DPC6411 PARTS LIST 2008-02 (2253 ko)
   MAKITA DPC6411 PARTS LIST 2008-02 (2253 ko)
   MAKITA DPC6411 PARTS LIST 2008-02 (2253 ko)
   MAKITA DPC6411 ANNEXE 472 PARTS LIST (1810 ko)
   MAKITA DPC6411 ANNEXE 503 PARTS LIST (1810 ko)
   MAKITA DPC6411 ANNEXE 947 PARTS LIST (1810 ko)
   MAKITA DPC6411 PARTS (2253 ko)
   MAKITA DPC6411 DC24WA (8531 ko)
   MAKITA DPC6411 PARTS LIST (1590 ko)
   MAKITA DPC6411 ANNEXE 218 (4034 ko)
   MAKITA DPC6411 PARTS LIST 2008-02 (2253 ko)
   MAKITA DPC6411 ANNEXE 897 PARTS LIST (1810 ko)

Manual abstract: user guide MAKITA DPC6411

Detailed instructions for use are in the User's Guide.

[. . . ] Always follow safety precautions in the Instruction and Safety Manual. The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. A, Inc warrant to the initial retail purchaser and each subsequent owner, that this utility equipment was designed, built, and equipped to conform at the time of initial sale to all applicable regulations of the U. Environmental Protection Agency (EPA), and that the engine is free of defects in materials and workmanship which would cause this engine to fail to conform with EPA regulations during its warranty period. [. . . ] The use of non-MAKITA spares, accessories, or cutting discs increases the risk of accident. We cannot accept any responsibility for accidents or damage occurring in association with the use of cutting discs or accessories other than original MAKITA. When calling for help, give the following information: - Place of the accident - What happened - Kind of injuries - Your name!For the event of a possible accident, please make sure that a first aid kit is always immediately available close by. Individuals with poor circulation who are exposed to excessive vibration may experience injury to blood vessels or the nervous system. Vibration may cause the following symptoms to occur in the fingers, hands or wrists: "Falling asleep" (numbness), tingling, pain, stabbing sensation, alteration of skin colour or of the skin. To protect unusable cutting discs from misuse, destroy them before disposal. When the Power Cut is worn out or damaged beyond repair, have it disposed of or recycled in an environmentally sound manner. Torque Idling speed Clutch engagement speed Engine speed limitation Max. Spindle speed Sound pressure level at the operators ear Sound pressure level at the bystander's position (50 ft) Vibration acceleration ah, w per EN 1454 - Tubular handle (idle/rated spindle speed) - Rear handle (idle/rated spindle speed) Carburetor (diaphragm carburetor) Ignition system (with speed limitation) Spark plug Electrode gap Fuel consumption at max. Load per ISO 8893 Fuel tank capacity Mixture ratio (fuel/two-stroke oil) - when using MAKITA HP 100 high-performance oil - when using MAKITA oil Cutting disc for 80 m/sec. 2) 4) Arbor diameter V-belt Overall weight (tanks empty, without cutting disc) cu in (cm3) in (mm) in (mm) hp (kW) Nm 1/min 1/min 1/min 1/min dB (A) dB (A) m/s2 m/s2 Type Type Type in (mm) kg/h g/kWh fl oz (l) Torque Idling speed Clutch engagement speed Engine speed limitation Max. Spindle speed Sound pressure level at the operators ear Sound pressure level at the bystander's position (50 ft) Vibration acceleration ah, w per EN 1454 - Tubular handle (idle/rated spindle speed) - Rear handle (idle/rated spindle speed) Carburetor (diaphragm carburetor) Ignition system (with speed limitation) Spark plug Electrode gap Fuel consumption at max. Load per ISO 8893 Fuel tank capacity Mixture ratio (fuel/two-stroke oil) - when using MAKITA HP 100 high-performance oil - when using MAKITA oil Cutting disc for 80 m/sec. 2) 4) Arbor diameter V-belt Overall weight (tanks empty, without cutting disc) Identification plate (12) Indicate when ordering spare parts Serial number Handle Filter cover for air filter and spark plug cap Cover lock Tubular handle Muffler Protection hood Grip V-belt tension adjusting screw Retaining nuts Stand Carburetor adjustment opening Identification plate Fuel tank with handle Decompression valve Starter grip Air intake Combination Start/Stop (I/O) switch, choke Stop knob for halfway throttle Safety locking button Throttle lever Tank cap (fuel) Starter housing with starter Cutting disc Disc bolt Spring washer Hold opening Always turn off the engine and pull off the spark plug cap before doing any work on the Power Cut! For the the following work, use the assembly tools included with delivery: 1. Place the Power Cut on a stable surface and carry out the following assembly steps: To do this, take off the filter cover (see the chapter on Cleaning / changing the air filter). Hinweis: The arbor hole of the cutting disc must be an exact fit with the arbor or shaft. If the arbor hole is larger, it must be fitted with an adapter ring (*). Make sure the cutting disc is installed so it turns in the right direction, if a direction is marked on the disc. Turn the disc slowly until the stop hole of the V-belt pulley is visible in the cutting arm cover (10). NOTE: Tighten the screw firmly (30 ± 2 Nm), as otherwise the cutting wheel may slip during cutting. [. . . ] Use only original MAKITA parts, marked Only original parts are from the same production line as the original unit and therefore ensure the highest possible quality of materials, dimensions, functioning and safety. Only original spare parts and accessories guarantee the highest quality in material, dimensions and function. Original spare parts and accessories can be obtained from your local dealer. He will also have the spare part lists to determine the required spare part numbers, and will be constantly informed about the latest improvements and spare part innovations. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA DPC6411




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA DPC6411 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.