User manual MAKITA HP1510

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA HP1510. We hope that this MAKITA HP1510 user guide will be useful to you.


MAKITA HP1510 : Download the complete user guide (137 Ko)

Manual abstract: user guide MAKITA HP1510

Detailed instructions for use are in the User's Guide.

[. . . ] yasuhiko Kanzaki CE 2003 Director MAKITA INTERNATIONAL EUROPE LTD. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND 2 SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. [. . . ] SAVE THESE INSTRUCTIONS 4 FUNCTIONAL DESCRIPTION • CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 002455 Switch action CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. For Model HP1500, HP1501 To start the tool, simply pull the switch trigger. For continuous operation, pull the switch trigger and then push in the lock button. To stop the tool from the locked position, pull the switch trigger fully, then release it. For continuous operation, pull the switch trigger and then push in the lock button. To stop the tool from the locked position, pull the switch trigger fully, then release it. Lock button 002410 Reversing switch action For Model HP1500, HP1501 This tool has a reversing switch to change the direction of rotation. Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. A stuck bit can be removed simply by setting the reversing switch to reverse rotation in order to back out. If you operate the tool with the button positioned halfway between the mode symbols, the tool may be damaged. Action mode changing button 5 ASSEMBLY • CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. NOTE: The side grip cannot swing 360° when the depth gauge is installed. Sleeve 002454 1 2 For Model HP1500, HP1510 To install the bit, place it in the chuck as far as it will go. After using the chuck key, be sure to return to the original position. [. . . ] Drilling in wood When drilling in wood, the best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece. Drilling in metal To prevent the bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA HP1510




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA HP1510 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.