User manual MAKITA HR2020X

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA HR2020X. We hope that this MAKITA HR2020X user guide will be useful to you.


MAKITA HR2020X : Download the complete user guide (670 Ko)

You may also download the following manuals related to this product:

   MAKITA HR2020X (577 ko)
   MAKITA HR2020X (577 ko)
   MAKITA HR2020X (577 ko)
   MAKITA HR2020X (577 ko)
   MAKITA HR2020X ANNEXE 694 (192 ko)
   MAKITA HR2020X ANNEXE 354 (192 ko)

Manual abstract: user guide MAKITA HR2020X

Detailed instructions for use are in the User's Guide.

[. . . ] Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire. Safety hints For your own safety, please refer to the enclosed safety instructions. In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load. [. . . ] Keep the tool in position and prevent it from slipping away from the hole. Do not apply more pressure when the hole becomes clogged with chips or particles. Instead, run the tool at an idle, then remove the bit partially from the hole. By repeating this several times, the hole will be cleaned out and normal drilling may be resumed. CAUTION: There is tremendous and sudden twisting force exerted on the tool/bit at the time of hole breakthrough, when the hole becomes clogged with chips and particles, or when striking reinforcing rods embedded in the concrete. Always use the side grip (auxiliary handle) and firmly hold the tool by both side grip and switch handle during operations. CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. for Model HR2020 , HR2020X and HR2021 To start the tool , simply pull the switch trigger. For continuous operation, pull the switch trigger and then push in the lock button. To stop the tool from the locked position, pull the switch trigger fully, then release it. For continuous operation, pull the switch trigger and then push in the lock button. To stop the tool from the locked position, pull the switch trigger fully, then release it. Coat the bit shank head beforehand with a small amount of bit grease (about 0. Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. When you operate the tool in counterclockwise rotation, the switch trigger is pulled only halfway and the tool runs at half speed. Use the dust cup to prevent dust from falling over the tool and on yourself when performing overhead drilling operations. Select one of the two modes suitable for your work needs by using this knob. For rotation only, turn the knob so that the arrow on the knob points toward the M symbol on the tool body. For rotation with hammering, turn the knob so that the arrow on the knob points toward the r symbol on the tool body. [. . . ] I metall kan du borra upp till 13 mm i diameter, och i trä upp till 32 mm i diameter. CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA HR2020X




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA HR2020X will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.