User manual MAKITA HR2611FT

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA HR2611FT. We hope that this MAKITA HR2611FT user guide will be useful to you.


MAKITA HR2611FT : Download the complete user guide (1734 Ko)

You may also download the following manuals related to this product:

   MAKITA HR2611FT (1742 ko)
   MAKITA HR2611FT (1742 ko)
   MAKITA HR2611FT (1742 ko)
   MAKITA HR2611FT (1742 ko)
   MAKITA HR2611FT (1742 ko)
   MAKITA HR2611FT (1742 ko)
   MAKITA HR2611FT (1742 ko)

Manual abstract: user guide MAKITA HR2611FT

Detailed instructions for use are in the User's Guide.

[. . . ] â· Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. For Models HR2310T, HR2610T, HR2611FT The quick change chuck for SDS-plus can be easily exchanged for the quick change drill chuck. [. . . ] 17) At this time, the depth gauge needs to be inserted so that its toothed side is directed to the toothed side of hex hole marking on the grip base as shown in Fig. Adjust the depth gauge to the desired depth by moving it back and forth while pressing the lock button. After the adjustment, release the lock button to lock the depth gauge. Inserting the depth gauge with its toothed side not directed to the toothed side of hex hole marking on the grip base as shown in the figure does not allow the depth gauge to be locked. The torque limiter will actuate when a certain torque level is reached. As soon as the torque limiter actuates, switch off the tool immediately. â· Bits such as hole saw, which tend to pinch or catch easily in the hole, are not appropriate for this tool. This is because they will cause the torque limiter to actuate too frequently. Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Use the dust cup to prevent dust from falling over the tool and on yourself when performing overhead drilling operations. Bit diameter Dust cup 5 Dust cup 9 Install the side grip so that the protrusions on the grip fit in between the grooves on the tool barrel. Coat the bit shank head beforehand with a small amount of bit grease (about 0. There is another type of dust cup (accessory) which helps you prevent dust from falling over the tool and on yourself when performing overhead drilling operations. Before installing the dust cup, remove the bit from the tool if installed on the tool. Install the dust cup (accessory) on the tool so that the symbol on the dust cup is aligned with the grooves in the tool. 21) To remove the dust cup, pull the chuck cover in the direction as shown in Fig. When installing or removing the dust cup, the cap may come off the dust cup. Remove the bellows from the attachment and fit the cap from the side shown in the figure with its carved side facing upward so that the groove in the cap fits in the inside periphery of the attachment. [. . . ] Do not use the tool with the dust cup when drilling in metal or similar. Using the dust cup for drilling in the metal may damage the dust cup due to the heat produced by small metal dust or similar. â· When using the dust cup, make sure that the dust cap is mounted on it securely. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA HR2611FT




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA HR2611FT will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.