User manual MAKITA HR4501C

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA HR4501C. We hope that this MAKITA HR4501C user guide will be useful to you.


MAKITA HR4501C : Download the complete user guide (451 Ko)

You may also download the following manuals related to this product:

   MAKITA HR4501C (1067 ko)
   MAKITA HR4501C (1067 ko)
   MAKITA HR4501C (1067 ko)
   MAKITA HR4501C (1067 ko)
   MAKITA HR4501C (1067 ko)
   MAKITA HR4501C (1067 ko)
   MAKITA HR4501C (1067 ko)
   MAKITA HR4501C (3121 ko)
   MAKITA HR4501C (3060 ko)
   MAKITA HR4501C (3060 ko)
   MAKITA HR4501C (3121 ko)
   MAKITA HR4501C (3060 ko)
   MAKITA HR4501C (3121 ko)
   MAKITA HR4501C (3121 ko)
   MAKITA HR4501C (3060 ko)
   MAKITA HR4501C (3060 ko)
   MAKITA HR4501C ANNEXE 1 (3060 ko)
   MAKITA HR4501C ANNEXE 40 (3231 ko)
   MAKITA HR4501C ANNEXE 53 (3121 ko)
   MAKITA HR4501C ANNEXE 85 (3087 ko)
   MAKITA HR4501C ANNEXE 39 (3087 ko)
   MAKITA HR4501C ANNEXE 484 (3087 ko)
   MAKITA HR4501C ANNEXE 856 (3087 ko)
   MAKITA HR4501C ANNEXE 126 (3087 ko)
   MAKITA HR4501C ANNEXE 637 (3087 ko)
   MAKITA HR4501C ANNEXE 650 (3087 ko)
   MAKITA HR4501C ANNEXE 981 (3087 ko)
   MAKITA HR4501C ANNEXE 528 (3231 ko)
   MAKITA HR4501C ANNEXE 776 (3231 ko)
   MAKITA HR4501C ANNEXE 503 (3231 ko)

Manual abstract: user guide MAKITA HR4501C

Detailed instructions for use are in the User's Guide.

[. . . ] Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. Intended use The tool is intended for hammer drilling in brick, concrete and stone as well as for chiselling work. Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. [. . . ] If you use this tool unsafely or incorrectly, you can suffer serious personal injury. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load. Do not touch the bit or parts close to the bit immediately after operation; they may be extremely hot and could burn your skin. FOR MODELS HR4510C/ HR4501C Trigger switch CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. ⷠThis switch functions when setting the tool in symbol and symbol modes. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. This switch functions only when setting the tool in symbol action mode. CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. FOR MODEL HR4511C CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. The revolutions and blows per minute can be adjusted just by turning the adjusting dial. Refer to the table below for the relationship between the number settings on the adjusting dial and the revolutions/blows per minute. CAUTION: If the tool is operated continuously at low speeds for a long time, the motor will get overloaded, resulting in tool malfunction. The speed adjusting dial can be turned only as far as 5 and back to 1. Do not force it past 5 or 1, or the speed adjusting function may no longer work. CAUTION: When using the tool in the symbol mode, the switch trigger does not work and only the slide switch works. CAUTION: Do not rotate the change lever when the tool is running under load. To avoid rapid wear on the mode change mechanism, be sure that the change lever is always positively located in one of the two or three action mode positions. The torque limiter will actuate when a certain torque level is reached. CAUTION: As soon as the torque limiter actuates, switch off the tool immediately. The side handle can be swung 360° on the vertical and secured at any desired position. [. . . ] To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. Keep the tool in position and prevent it from slipping away from the hole. Do not apply more pressure when the hole becomes clogged with chips or particles. Instead, run the tool at an idle, then remove the bit partially from the hole. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA HR4501C




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA HR4501C will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.