User manual MAKITA LS1216L

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA LS1216L. We hope that this MAKITA LS1216L user guide will be useful to you.


MAKITA LS1216L : Download the complete user guide (4006 Ko)

You may also download the following manuals related to this product:

   MAKITA LS1216L (2415 ko)
   MAKITA LS1216L (2415 ko)
   MAKITA LS1216L (2415 ko)
   MAKITA LS1216L (2415 ko)
   MAKITA LS1216L (2415 ko)
   MAKITA LS1216L (2415 ko)
   MAKITA LS1216L (2205 ko)
   MAKITA LS1216L (2205 ko)
   MAKITA LS1216L (2205 ko)
   MAKITA LS1216L (2415 ko)
   MAKITA LS1216L (2205 ko)
   MAKITA LS1216L (2205 ko)
   MAKITA LS1216L (2205 ko)
   MAKITA LS1216L ANNEXE 99 (2462 ko)
   MAKITA LS1216L ANNEXE 821 (2462 ko)
   MAKITA LS1216L ANNEXE 690 (2462 ko)
   MAKITA LS1216L ANNEXE 187 (2462 ko)
   MAKITA LS1216L ANNEXE 419 (2462 ko)
   MAKITA LS1216L ANNEXE 459 (2462 ko)
   MAKITA LS1216L ANNEXE 603 (2462 ko)
   MAKITA LS1216L ANNEXE 450 (2462 ko)
   MAKITA LS1216L ANNEXE 571 (2205 ko)
   MAKITA LS1216L ANNEXE 598 (2205 ko)
   MAKITA LS1216L PARTS LIST (1646 ko)
   MAKITA LS1216L ANNEXE 89 (2462 ko)
   MAKITA LS1216L ANNEXE 289 (1230 ko)
   MAKITA LS1216L ANNEXE 755 (2205 ko)
   MAKITA LS1216L PARTS LIST 12-2010 (1548 ko)

Manual abstract: user guide MAKITA LS1216L

Detailed instructions for use are in the User's Guide.

[. . . ] Cutting capacities (H x W) Miter angle Bevel angle 45°(left) 61mm×382mm 0° (2-3/8"×15") 71mm×363mm (2-13/16"×14-1/4") 20mm Thickness of wood facing (13/16") 38mm (1-1/2") 78mm×325mm (3-1/16"×12-3/4") 80mm×292mm (3-1/8"×11-1/2") 61mm×268mm 45°(left and right) (2-3/8"×10-1/2") 71mm×255mm (2-13/16"×10") 15mm Thickness of wood facing (9/16") 25mm (1") 52°(left and right) 15mm Thickness of wood facing (9/16") 25mm (1") 60°(right) 15mm Thickness of wood facing (9/16") 25mm (1") 0° 92mm×382mm (3-5/8"×15") 107mm×363mm (4-1/4"×14-1/4") 115mm×325mm (4-1/2"×12-3/4") 120mm×292mm (4-3/4"×11-1/2") 92mm×268mm (3-5/8"×10-1/2") 107mm×255mm (4-1/4"×10") 115mm×227mm (4-1/2"×8-15/16") 120mm×212mm (4-3/4"×8-3/8") 92mm×233mm (3-5/8"×9-1/8") 107mm×220mm (4-1/4"×8-5/8") 115mm×197mm (4-1/2"×7-3/4") 120mm×180mm (4-3/4"×7-1/8") 92mm×185mm (3-5/8"×7-1/4") 107mm×178mm (4-1/4"×7") 115mm×155mm (4-1/2"×6-1/8") 120mm×140mm (4-3/4"×5-1/2") 45°(right) 44mm×382mm (1-3/4"×15") 54mm×363mm (2-1/8"×14-1/4") 61mm×325mm (2-3/8"×12-3/4") 44mm×268mm (1-3/4"×10-1/2") 54mm×255mm (2-1/8"×10") LS1216/LS1216L 305 mm (12") 25. Cutting capacities Crown molding 45 type (with Crown molding stopper used) Base board (H) (with Horizontal vise used) No load speed (RPM) Laser Type (LS1216L only) Dimensions (L x W x H) Net weight Wavelength 655 nm, Maximum output 203 mm (8") 165 mm (6-1/2") 3, 200/min. Due to our continuing programme of research and development, the specifications herein are subject to change without notice. Learn the tool's applications and limitations, as well as the specific potential hazards peculiar to it. [. . . ] When bevel-cutting operations are complete, don't forget to return the upper fences to the original position and secure it. Lower fences can be moved to the inside and outside by loosening the clamping screws. The vertical vise can be installed in two positions on either the left or right side of the base. If the screw to secure the vise arm contacts the carriage, install the screw on the opposite side of vise arm. Make sure that no part of the tool contacts the vise when lowering the handle fully and pulling or pushing the carriage all the way. position the workpiece at the desired cutting position and secure it firmly by tightening the vise knob. Turning the vise knob to 90° counterclockwise allows the vise knob to be moved up and down, facilitating the quick setting of workpiece. To secure the workpiece after setting, turn it the vise knob clockwise. CAUTION: The workpiece must be secured firmly against the turn base and guide fence with the vise during all operations. To grip the workpiece, push the vise knob forward until the vise plate contacts the workpiece and flip the vise nut to the right. This could cause the workpiece to be thrown, cause damage to the blade or cause the loss of control, which can result in PERSONAL INJURY. When cutting out thin workpiece, such as base boards, against the fence, always use the horizontal vise. The holders can be installed on either side as a convenient means of holding workpieces horizontally. Slip the holder rods into the holes in the base and adjust their length according to the workpiece to be held. CAUTION: Always support long workpieces level with the top surface of the turn base for accurate cuts and to prevent dangerous loss of control of the tool. The horizontal vise can be installed in two positions on either the left or right side of the base. When performing 15° or greater miter cuts, install the horizontal vise on the side opposite the direction in which the turn base is to be turned. CAUTION: Before use, be sure to release the handle from the lowered position by pulling the stopper pin. Too much force may result in overload of the motor and/or decreased cutting efficiency. Push down handle with only as much force as is necessary for smooth cutting and without significant decrease in blade speed. If the handle is pressed down with force or if lateral force is applied, the blade will vibrate and leave a mark (saw mark) in the workpiece and the precision of the cut will be impaired. During a slide cut, gently push the carriage toward the guide fence without stopping. [. . . ] Loosen but do not remove the screw which secures the lens using a screwdriver. If the lens does not come out, loosen the screw further and pull out the lens again without removing the screw. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. Miter saw blades Combination Crosscutting Fine cross cuts After replacing brushes, plug in the tool and break in brushes by running tool with no load for about 10 minutes. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA LS1216L




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA LS1216L will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.