User manual MAKITA MH2556

[. . . ] English / French / German / Dutch / Italian / Spanish Pole Hedge Trimmer Taille haie à Rallonge Hock-Heckenschere Tagliasiepi Prolungato a Scoppio Stok Heggenschaar Cortasetos Articulado de Altura Instruction Manual Manuel d’instructions Betriebsanleitung MH-2556 Manuale di istruzioni Handleiding Manual de instrucciones Important: Read this instruction manual thoroughly before using the Pole Hedge Trimmer and follow the safety regulations carefully. English Thank you very much for choosing the DOLMAR Pole Hedge Trimmer. We are pleased to offer you a product that is the result of an extensive development program and many years of knowledge and experience. To safely obtain the best possible results from your DOLMAR Pole Hedge Trimmer, please read this manual thoroughly before using the machine, and follow all instructions given herein to assure proper operation of the DOLMAR Pole Hedge Trimmer. [. . . ] Gasoline or oil coming into contact with the eyes can cause severe eye irritation. Should gasoline or oil come into contact with your eyes, immediately rinse your eyes with large amounts of clean water. 50 1000mL (1L) 5000mL (5L) 10000mL (10L) Û 20mL 100mL 200mL Refueling - Turn off the engine. - Always wipe off the fuel tank cap to protect the fuel tank from contamination. - Always wipe off spilled fuel immediately to reduce the risk of fire. fuel storage - Fuel deteriorates if stored over an extended period of time. 10 PRECAUTIONS BEFORE STARTING THE ENGINE - At all times allow a 15-meter diameter safety zone around the working area. Make sure that all persons (in particular children) and/or animals remain outside this zone. - Before using the pole hedge trimmer, make sure that the machine is in safe operational condition. Make sure that the cutter blades are not damaged, and check the throttle lever for easy action. Confirm that the cutter blades are not in motion when the engine is idling. Make sure that the handles are clean and dry, and test whether the I-O switch is functioning properly. Start the engine only in accordance with the instructions given in this manual. Do not use any other methods to start the pole hedge trimmer (see , "Starting the Engine"). - Start the engine of the pole hedge trimmer only after having read and fully understood the instructions. Never attempt to start a pole hedge trimmer that has not been fully assembled. - Before starting the engine, always make sure that the cutter blades are not obstructed by stones, branches or any other solid objects. - Check the working area for wires, cord, glass or other foreign objects that could get caught in the cutter blades. Check the entire work area for the presence of power lines and electrical fences before starting to work. STARTING THE ENGINE If the machine has just been refueled, move at least 3 meters away from the location where the pole hedge trimmer was refueled. Place the pole hedge trimmer on a reasonably clean spot on level ground, and make sure that the cutter blades are not in contact with the ground or any other solid objects. Cold start (cold engine / engine was stopped for more than 5 minutes / after refueling) 1. [. . . ] A clogged air cleaner may make it difficult or impossible to start and/or accelerate the engine. Element Screw Air cleaner cover Checking the spark plug - Every 8 hours (daily) - Only use the universal wrench provided to remove and replace the spark plug. Clean or replace the spark plug if contaminated and/or clogged with carbon residue. 15 Adding grease and lubricant - The gearbox of the pole hedge trimmer should be greased every 20 working hours. [. . . ]