User manual MAKITA N1923B

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA N1923B. We hope that this MAKITA N1923B user guide will be useful to you.


MAKITA N1923B : Download the complete user guide (505 Ko)

You may also download the following manuals related to this product:

   MAKITA N1923B (514 ko)
   MAKITA N1923B (514 ko)
   MAKITA N1923B (514 ko)
   MAKITA N1923B (514 ko)
   MAKITA N1923B ANNEXE 4 (402 ko)
   MAKITA N1923B ANNEXE 97 (402 ko)
   MAKITA N1923B PARTS LIST (150 ko)
   MAKITA N1923B ANNEXE 850 (402 ko)
   MAKITA N1923B ANNEXE 241 (402 ko)
   MAKITA N1923B ANNEXE 461 (402 ko)
   MAKITA N1923B ANNEXE 844 (402 ko)
   MAKITA N1923B ANNEXE 976 (402 ko)
   MAKITA N1923B ANNEXE 557 (402 ko)
   MAKITA N1923B ANNEXE 205 (402 ko)
   MAKITA N1923B ANNEXE 264 (402 ko)
   MAKITA N1923B ANNEXE 257 (402 ko)
   MAKITA N1923B ANNEXE 683 (173 ko)
   MAKITA N1923B ANNEXE 480 (1838 ko)
   MAKITA N1923B PARTS LIST (107 ko)
   MAKITA N1923B ANNEXE 977 (402 ko)
   MAKITA N1923B ANNEXE 858 (173 ko)
   MAKITA N1923B ANNEXE 621 (1838 ko)

Manual abstract: user guide MAKITA N1923B

Detailed instructions for use are in the User's Guide.

[. . . ] Make sure the blade is not contacting the workpiece before the switch is turned on. Always switch off and wait for the blades to come to a complete stop before any adjusting. When leaving the planer, switch off and set it with the front base up on a wooden block, so that the blades do not contact anything. [. . . ] Set the drum cover over the adjust plate/set plate and screw in the three hex flange head bolts so that a gap exists between the drum and the set plate to slide the mini planer blade into position. The blade's lengthwise adjustment will need to be manually positioned so that the blade ends are clear and equidistant from the housing on one side and the metal bracket on the other. Tighten the three hex flange head bolts (with the socket wrench provided) and hand rotate the drum to check clearances between the blade ends and the machine body. cAUTION: Tighten the blade installation bolts carefully when attaching the blades to the machine. Your planing surface will end up rough and uneven, unless the blade is set properly and securely. The blade must be mounted so that the cutting edge is absolutely level, that is, parallel to the surface of the rear base. Although this side view cannot show it, the edges of the blades run perfectly parallel to the rear base surface. Cause: One or both blade edges fails to protrude enough in relation to rear base line. Cause: One or both blade edges protrudes too far in relation to rear base line. Depth of cut may be adjusted by simply turning the knob on the front of the machine. First, rest the machine front base flat upon the workpiece surface without the blades making any contact. Apply pressure on the front of machine at the start of planing, and at the back at the end of planing. Planing will be easier if you incline the workpiece in stationary fashion, so that you can plane somewhat downhill. The power planer keeps cutting at a speed that will not result in jamming by chips. [. . . ] Use of the special nozzle assembly will minimize chip scatter, making for a cleaner work area. The nozzle assembly may be attached after the chip cover on the machine body is removed. When slipping on the assembly, fit the pin on it into the rear cover hole. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA N1923B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA N1923B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.