User manual MAKITA PM42

[. . . ] Engine fuel is highly flammable: – Store fuel in containers specifically designed for this purpose. Never remove the cap of the fuel tank or add fuel while the engine is running or when the engine is hot. €“ If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until the fuel has evaporated and the vapour dispersed. [. . . ] 10) Stop the blade if the lawnmower has to be tilted for transportation when crossing surfaces other than grass, and when transporting the lawnmower to and from the area to be mowed. €“ use an appropriate number of people for the weight of the machine and the characteristics of the vehicle or the place where it has to be placed or collected. 18 GB STANDARDS OF USE For instructions regarding the engine and the battery (if supplied), read the relevant manuals. 4 When you have finishing mowing, release the brake lever (1) and disconnect the spark plug cap (2). WAIT FOR THE BLADE TO STOP before carrying out any type of work on the machine. FINISH ASSEMBLY NOTE – The machine can be supplied with some of the components already fitted. ROUTINE MAINTENANCE IMPORTANT – Regular, careful maintenance is essential for keeping the safety level and original performance of the machine unchanged in time. 1) Wear strong working gloves during any cleaning, maintenance or adjustment operation on the machine. 2) Carefully clean the machines with water after each cut; remove the grass debris and mud accumulated inside the chassis to avoid their drying and thus making the next start-up difficult. 3) The paintwork on the inside of the chassis may peel off in time due to the abrasive action of the cut grass; in this case, intervene promptly by touching up the paintwork using a rustproof paint to prevent the formation of rust that would lead to corrosion of the metal. 4) Should it be necessary to access the lower part, only tilt the machine from the side shown in the engine handbook; following the relative instructions. 1 To mount the stone-guard (1), the left end of the pin (2) must be pushed through and then inserted in the hole of the left-hand (3) on the chassis. Line up the other end of the pin with the relative hole in the right-hand support (4). Using a screwdriver, push the pin into the hole so that the groove (5) can be reached. Fit the snap ring (6) into the groove and hook on the right (7) and left (8) springs, as shown. 2 Attach the lower part of the handle (1) to the side supports on the chassis. Secure it using the screws (2) supplied, making sure that the centring washers (3) are positioned correctly. Attach the upper part (4) using the screws (5) supplied, ensuring that the spiral (6) of the starter cable is in the correct position. [. . . ] Only original spare parts and accessories guarantee the highest quality in material, dimensions, function and safety. Original spare parts and accessories can be obtained from your local dealer. He will also have the spare part lists to determine the required spare part numbers, and will be constantly informed about the latest improvements and spare part innovations. [. . . ]