User manual MAKITA UB1100

[. . . ] Due to our continuing program of research and development, the specifications herein are subject to change without notice. ⷠNote: Specifications may differ from country to country. [. . . ] To stop the tool from the locked position, pull the trigger fully, then release it. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it. A speed control screw is provided so that maximum tool speed can be limited (variable). Turn the speed control screw clockwise for higher speed, and counterclockwise for lower speed. Never point the nozzle at anyone in the vicinity when using the blower. Do not collect still smoldering cigarette ashes, freshly cut metals shavings, screws, nails and the like. Warning ­ Electric shock could occur if used on wet surfaces. The blower is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the blower. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by a Makita Authorized Service Center. [. . . ] The typical A-weighted noise levels are sound pressure level: 86 dB (A) sound power level: 99 dB (A) ­ Wear ear protection. ­ The typical weighted root mean square acceleration value is not more than 2. [. . . ]