User manual MAKITA UC250D

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA UC250D. We hope that this MAKITA UC250D user guide will be useful to you.


MAKITA UC250D : Download the complete user guide (2989 Ko)

Manual abstract: user guide MAKITA UC250D

Detailed instructions for use are in the User's Guide.

[. . . ] ς αλυσίδας αλυσοπρίονου Cd Ni-MH Li-ion • Only for EU countries Do not dispose of electric equipment or battery pack together with household waste material!In observance of European Directive 2002/96/EC on waste electric and electronic equipment, 2006/ 66/EC on batteries and accumulators and waste batteries and accumulators and their implementation in accordance with national laws, electric equipment and battery pack that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Of drive links Number of teeth Overall length Net weight Rated voltage BUC250 8. 36 V GEB071-6 • Weight, with battery cartridge, according to EPTA-Procedure 01/2003 ENE031-2 CORDLESS CHAIN SAW SAFETY WARNINGS: 1. [. . . ] ASSEMBLY CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing saw chain CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the saw chain. €¢ Always wear gloves when installing or removing the saw chain. 7) Press the lever and with the lever pressed in, turn it counterclockwise to loosen the nut until sprocket cover comes off. 8) Turn the adjusting dial counterclockwise to release the saw chain tension. To install the saw chain, fit in one end of the saw chain on the top of the guide bar and the other end of it around the sprocket. Battery remaining capacity indicator (only for models with Battery BL3622A) Battery BL3622A is equipped with the battery remaining capacity indicator. At this time, fit the saw chain as shown in the figure because it rotates in the direction of arrow. After refilling the tank, always screw the provided oil tank cap on the chain saw. €¢ As a saw chain oil, use oil exclusively for Makita chain saws or oil available in market. • Never use oil including dust and particles or volatile oil. €¢ Before cutting out, make sure that the provided oil tank cap is screwed in place. Bring the lower guide into contact with the branch to be cut before switching on. Cutting without bringing the lower guide into contact with the branch may cause the guide bar to wobble, resulting in injury to operator. 18 & 19) CAUTION: • Before using battery adapter, read all instructions on tools using battery. €¢ When charging a battery cartridge, first remove it from the battery adapter and then charge it. It is not allowed to charge the battery cartridge while using battery adapter. Installing or removing battery adapter • Always switch off the tool before insertion or removal of the battery adapter. €¢ To remove the battery adapter, slide it from the tool while sliding the button on the adapter. €¢ To install the battery adapter, align the tongue on the battery adapter with the groove in the housing and slip it into place. CAUTION: • Always install the battery adapter fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. [. . . ] The file holder has markings for the correct sharpening angle of 30° (align the markings parallel to the saw chain) and limits the depth of penetration (to 4/5 of the file diameter). 38) - After sharpening the chain, check the height of the depth gauge using the chain gauge tool (optional accessory). - Remove any projecting material, however small, with a special flat file (optional accessory). - Wash away dust and particles from saw chain after adjusting the height of depth gauge. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA UC250D




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA UC250D will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.