User manual MAKITA UM164D

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA UM164D. We hope that this MAKITA UM164D user guide will be useful to you.


MAKITA UM164D : Download the complete user guide (2477 Ko)

You may also download the following manuals related to this product:

   MAKITA UM164D (3003 ko)
   MAKITA UM164D (3003 ko)
   MAKITA UM164D (3003 ko)
   MAKITA UM164D (3003 ko)
   MAKITA UM164D (3003 ko)
   MAKITA UM164D (3003 ko)
   MAKITA UM164D (3003 ko)
   MAKITA UM164D PARTS LIST (527 ko)

Manual abstract: user guide MAKITA UM164D

Detailed instructions for use are in the User's Guide.

[. . . ] Screws Grass shear blade cover Grass shear blade Trimming direction Tilt the blades Hedge surface to be trimmed String Clamping nuts Chip receiver Screws on the shear blades Blade cover to be always installed before installing the chip receiver 43. Model Effective cutting width Stroke per minute (min-1) Dimensions (L x W x H) Net weight Rated voltage UM164D 160 mm 1, 250 292 mm x 178 mm x 130 mm 1. Due to our continuing programme of research and development, the specifications herein are subject to change without notice. ⷠWeight according to EPTA-Procedure 01/2003 Symbols END010-1 The following show the symbols used for the equipment. [. . . ] Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. Always switch off the tool before insertion or removal of the battery cartridge. ⷠTo remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge. ⷠTo insert the battery cartridge, hold it so that the battery cartridge front shape fits to that of the battery installment opening and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. ⷠDo not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. Always stop tool operation and charge the battery cartridge when you notice less tool power. When the tool is also overloaded and has stopped during operation, the lamp lights up in red. Refer to the following table for the status and action to be taken for the indication lamp. 15) Fit the crank with its recessed part facing upwards onto the pins. At this time, apply a small amount of grease to the periphery of the crank using grease that the shear blades as optional accessory are provided with or that remains inside gear housing. 16) Overlap the oval hole in the upper blade with that in the lower one. Move the shear blades so that the hole in the base plate of shear blades are positioned in the center of these overlapped oval holes. 17) Turn the shear blades upside down and install it so that the pins on the tool fit in the hole in the shear blades. Make sure that the shear blades are set in place securely as far as they reach the base plate. 19) Press the undercover down and turn the undercover clockwise while pressing it down until the symbol on the label is aligned with the symbol on the locking lever (the undercover is completely locked. 20) At this time, make sure that the locking lever fits in the groove in the undercover. [. . . ] 49) Trim boxwood or rhododendron from the base toward the top for a nice appearance and good job. Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing chip receiver. nOTE: · When replacing the chip receiver, always wear gloves so that hands and face does not directly contact the blade. When replacing the chip receiver, always be careful not to contact the shear blades. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA UM164D




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA UM164D will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.